Prepar3D v3.4 Hotfix 3 – SLI Update has been released and ready to Install v 3.4.22.19868
This hotfix is to address reported issues and incompatibilities with SLI mode of NVIDIA hardware
Please Read the Releases Notes: Fixes and Improvements Release Notes
Only the Client installer is required for Prepar3D v3.4 Hotfix 3
To update with the Client only, Please see here for Instructions Update the Client
Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Elaine Dixon
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Hi,
release notes for the 3.4.22 SDK?
thanks
release notes for the 3.4.22 SDK?
thanks
-
- Posts: 12
- Joined: Thu Feb 02, 2017 12:08 pm
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
First, thank you for your support guys!
After updating the Hotfix 3, I still have some problems with the current NVIDIA driver 378.49.
http://www.prepar3d.com/forum/viewtopic ... 1&start=60
After updating the Hotfix 3, I still have some problems with the current NVIDIA driver 378.49.
http://www.prepar3d.com/forum/viewtopic ... 1&start=60
- nigelallenby
- Posts: 127
- Joined: Sat Jun 07, 2014 9:43 am
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Well Done Poppet and LM! A relative stutter free flight sim at last.
Followed Elaine's guide to the "T", installed FSUIPC4961, latest Nvidia driver already 378.49 already installed and updated Plan-G to the latest version and now have a steady flight sim with a FPS average variation of 0.4% locked at 23.
I have this :-
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
AverageFrameRate=2,1 to record on screen.
The only additions to P3D.cfg I've added are :- FIBER_FRAME_TIME_FRACTION=0.1
[JOBSCHEDULER]
AffinityMask=14
Are these needed?
Nigel
Followed Elaine's guide to the "T", installed FSUIPC4961, latest Nvidia driver already 378.49 already installed and updated Plan-G to the latest version and now have a steady flight sim with a FPS average variation of 0.4% locked at 23.
I have this :-
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
AverageFrameRate=2,1 to record on screen.
The only additions to P3D.cfg I've added are :- FIBER_FRAME_TIME_FRACTION=0.1
[JOBSCHEDULER]
AffinityMask=14
Are these needed?
Nigel
Intel i9-10900K. ASUS Z490 ROG Maximus XII Hero M/B. 32GB Corsair Vengeance DDR4Ram. ASUS NVIDIA GeForce GTX 1060 3GB Graphic card. 500GB SSD HD , secondary 1000GB HDD, third 1000GB. Corsair RM750 Gold 750watt PSU. Win10 Home 64bit
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Depending on your CPU affinityMask 14 may be causing more damage than good, and fftf=0.1 nothing..remove them and see..
Jorge
Jorge
Jorge Roldan
OZx Developer (aero) - Hovercontrol Helicopter Certified Pilot - Spad.Next Beta Tester - VATPAC Pilot PR
System i9-9990 4.7Ghz 32GB W11 Nvidia GeForce RTX 2080 8GB
OZx Developer (aero) - Hovercontrol Helicopter Certified Pilot - Spad.Next Beta Tester - VATPAC Pilot PR
System i9-9990 4.7Ghz 32GB W11 Nvidia GeForce RTX 2080 8GB
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Hello - will someone please confirm that Hotfix 3 is cumulative and includes hot fix 1 and hot fix2. I have seen some posts suggesting that it does not. I could not find anything in the release notes stating either way..
I wanted to also say thank you to LM for correcting the SLI issues. Working great for me!
Thanks in advance.
Daniel
I wanted to also say thank you to LM for correcting the SLI issues. Working great for me!
Thanks in advance.
Daniel
- nigelallenby
- Posts: 127
- Joined: Sat Jun 07, 2014 9:43 am
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
Hi Jorge,
Nigel
P.S. Do not have SLI installed.
Did that and straight away my FPS dropped by 3-5 with an average of 10-15%, i.e my FPS was locked at 23 but it was showing 19-20 during a flight. No stutters though so I re-introduced FFTF into the P3D.cfg and I have a steady 23FPS and smooth. Have not installed AffinityMask but have set Priority to "High" in Task Manager prior to flight.Depending on your CPU affinityMask 14 may be causing more damage than good, and fftf=0.1 nothing..remove them and see..
Nigel
P.S. Do not have SLI installed.
Intel i9-10900K. ASUS Z490 ROG Maximus XII Hero M/B. 32GB Corsair Vengeance DDR4Ram. ASUS NVIDIA GeForce GTX 1060 3GB Graphic card. 500GB SSD HD , secondary 1000GB HDD, third 1000GB. Corsair RM750 Gold 750watt PSU. Win10 Home 64bit
Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868
since hotfix one and two cant be downloaded anymore, i think it would be save to think that it is a cumulative update.
Windows 11 x64 on a 4TB SSD | AMD Ryzen Threadripper 3960X | TRX40 AORUS Master | 128GB DDR4 3600MHz | 1250W PSU | 2x EVGA RTX 3090 | P3D v5 and MSFS2020 on a 4TB SSD | Custom Corsair Hydro Cooling