Lost Ability to Pan Around Cabin/Exterioir - SimConnect Applications
-
- Posts: 36
- Joined: Sun Jul 31, 2016 10:37 pm
Lost Ability to Pan Around Cabin/Exterioir - SimConnect Applications
Since the update I can no longer pan around the inside of the cockpit or go outside the cabin and use my number keys to pan around the aircraft.
How do I fix this. I have checked that my keyboard was plugged in and NUM lock is set.
Thanks
Randy
How do I fix this. I have checked that my keyboard was plugged in and NUM lock is set.
Thanks
Randy
- Rob McCarthy
- Lockheed Martin
- Posts: 3703
- Joined: Wed Aug 24, 2011 1:37 pm
Re: Lost Ability to Pan Around Cabin/Exterioir
Hi Randy,
Do you have any add-ons installed that may be interfering with these commands. Some add-ons may not be fully 4.2 compatible yet. Also double check to ensure the correct keyboard mappings for these commands are still assigned.
Regards,
Rob McCarthy
Do you have any add-ons installed that may be interfering with these commands. Some add-ons may not be fully 4.2 compatible yet. Also double check to ensure the correct keyboard mappings for these commands are still assigned.
Regards,
Rob McCarthy
Rob McCarthy
Prepar3D® Core Lead
Prepar3D® Core Lead
since Update 4.2 no numpad ?
Hello,
i cannot use my numpad like before for sights ...
is this a standart problem / can i change it like before ?
( numpad 2 in external view ...i am behind the plane ) and so on
i cannot use my numpad like before for sights ...
is this a standart problem / can i change it like before ?
( numpad 2 in external view ...i am behind the plane ) and so on
-
- Posts: 40
- Joined: Thu Dec 24, 2015 7:47 am
Re: Lost Ability to Pan Around Cabin/Exterioir
Randy, Im so glad i came across this post. I am having the EXACT SAME issue as you. I checked to see if it was the CS 757 causing it but its not because the default aircraft have the same issue.
- Brady Butler
- Lockheed Martin
- Posts: 965
- Joined: Tue May 09, 2017 5:31 pm
Re: since Update 4.2 no numpad ?
Hello higgy_de,
Have you tried it with toggling numlock? Let us know if it still doesn't work for you after toggling numlock. It's working as expected on our end.
Regards,
Brady
Have you tried it with toggling numlock? Let us know if it still doesn't work for you after toggling numlock. It's working as expected on our end.
Regards,
Brady
Brady Butler
Prepar3D® Software Engineer
Prepar3D® Software Engineer
- Brady Butler
- Lockheed Martin
- Posts: 965
- Joined: Tue May 09, 2017 5:31 pm
Re: Lost Ability to Pan Around Cabin/Exterioir
Hello,
Do you have any panels open that may be taking the key entries?
Regards,
Brady
Do you have any panels open that may be taking the key entries?
Regards,
Brady
Brady Butler
Prepar3D® Software Engineer
Prepar3D® Software Engineer
-
- Posts: 36
- Joined: Sun Jul 31, 2016 10:37 pm
Re: Lost Ability to Pan Around Cabin/Exterioir
Does anyone have a mapping schematic on how to reassign the number keys?
Re: since Update 4.2 no numpad ?
I try now several hours ...numpad on, off, deinstall addons ...
no work for numpads 4,8,6,2 for directions sight ... :(
no work for numpads 4,8,6,2 for directions sight ... :(
-
- Posts: 40
- Joined: Thu Dec 24, 2015 7:47 am
Re: Lost Ability to Pan Around Cabin/Exterioir
No, there are no panels open. I literally start p3d with the default flight and aircraft and still nothing.Brady Butler wrote: ↑Wed Feb 14, 2018 12:54 pm Hello,
Do you have any panels open that may be taking the key entries?
Regards,
Brady
-
- Posts: 40
- Joined: Thu Dec 24, 2015 7:47 am
Re: Lost Ability to Pan Around Cabin/Exterioir
even tried a fresh config and still the same. i know numpad is working because i have tried two different keyboards and im able to type numbers.
- Rob McCarthy
- Lockheed Martin
- Posts: 3703
- Joined: Wed Aug 24, 2011 1:37 pm
Re: Lost Ability to Pan Around Cabin/Exterioir
After a fresh config are there still add-ons still installed? Does running the "Delete Generated Files" shortcut in the Prepar3D directory have any effect?
Regards,
Rob McCarthy
Regards,
Rob McCarthy
Rob McCarthy
Prepar3D® Core Lead
Prepar3D® Core Lead
-
- Posts: 40
- Joined: Thu Dec 24, 2015 7:47 am
Re: Lost Ability to Pan Around Cabin/Exterioir
yes i still have add-ons but im not using EZDOK or ChasePlane. Like i said, i can load into the default flight with the default aircraft and still cant pan. i can will try the delete generated files and come back with the results. thank you for the Reply.Rob McCarthy wrote: ↑Wed Feb 14, 2018 7:28 pm After a fresh config are there still add-ons still installed? Does running the "Delete Generated Files" shortcut in the Prepar3D directory have any effect?
Regards,
Rob McCarthy
-
- Posts: 40
- Joined: Thu Dec 24, 2015 7:47 am
Re: Lost Ability to Pan Around Cabin/Exterioir
ran the Delete Generated Files and still the same, can't use numpad to pan.
Re: Lost Ability to Pan Around Cabin/Exterioir
I deactivate with SIMstarter NG everything ..( except fsuipc) nothing helps.
does anyone know, how to deactivate fsuipc ?
Could this ( its only for 4.1...wait for new version ) the problem-maker ?
does anyone know, how to deactivate fsuipc ?
Could this ( its only for 4.1...wait for new version ) the problem-maker ?
Re: Lost Ability to Pan Around Cabin/Exterioir
I can confirm I have this exact same problem. I have no applications installed that should affect camera views. If I roll back to the previous version of P3DV4 I get my ability to pan with the numpad again.