Prepar3D does not open
Prepar3D does not open
Hello,
Here is my problem.
1- I bought the academic version of prepar3D, I installed it perfectly well and I even checked the installation instructions. ✔
2 - The license has no problem, it has been validated. ✔
3 - When opening the simulator, it remains open for a few seconds and switches off. X
All my drivers are up to date.
Thank you.
Adrien Assous
Graphics Adapter : NVIDIA GeForce RTX 2080 4K
Ram : 32.0GB
Processor : Intel Core i9-9900K CPU 3.60 GHz
Here is my problem.
1- I bought the academic version of prepar3D, I installed it perfectly well and I even checked the installation instructions. ✔
2 - The license has no problem, it has been validated. ✔
3 - When opening the simulator, it remains open for a few seconds and switches off. X
All my drivers are up to date.
Thank you.
Adrien Assous
Graphics Adapter : NVIDIA GeForce RTX 2080 4K
Ram : 32.0GB
Processor : Intel Core i9-9900K CPU 3.60 GHz
Re: Prepar3D does not open
@ A.Assous ,
LM is working with Nvidia on the current drivers issue and recommends staying on the previous 461.92 driver in the meantime.
Additional information:
Nvidia drivers (current and older) search/look up is here:
https://www.nvidia.com/en-us/geforce/drivers/
LM is working with Nvidia on the current drivers issue and recommends staying on the previous 461.92 driver in the meantime.
Additional information:
Nvidia drivers (current and older) search/look up is here:
https://www.nvidia.com/en-us/geforce/drivers/
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Prepar3D does not open
Thank you very much it works perfectly!
-
- Posts: 7
- Joined: Fri Feb 22, 2019 3:15 pm
Re: Prepar3D does not open
Hi I am having the CTD with v5.1.
O/S Windows10 pro 10.0.19042
CPU Intel i5-7600k @3.80ghs Driver V 465.89
Video Adapter Nvidia Geforce 1080 8gb DX V 12
M2 500gb for P3d
I have read and followed others who are having same problems.
1.So I have uninstalled P3d completely cleaned up the everything, checked on the drive and cleared out anything to do with P3d and used a registry cleaner so P3d did not appear anywhere.
2. Cleaned the registry.
3. Run from CMD checked disk.
4. On reinstallation switched of virus scanner McAfee when reinstalling.
5. I used the DDU to reinstall my Nvidia driver from 466.11 to 465.89.
Still no joy any suggestions please as it was all working ok when suddenly I started up yesterday and low and behold I got the CRASH TO DESKTOP I had not changed anything or done anything from the night before I am baffled I want to fly.
Thanks for any help
O/S Windows10 pro 10.0.19042
CPU Intel i5-7600k @3.80ghs Driver V 465.89
Video Adapter Nvidia Geforce 1080 8gb DX V 12
M2 500gb for P3d
I have read and followed others who are having same problems.
1.So I have uninstalled P3d completely cleaned up the everything, checked on the drive and cleared out anything to do with P3d and used a registry cleaner so P3d did not appear anywhere.
2. Cleaned the registry.
3. Run from CMD checked disk.
4. On reinstallation switched of virus scanner McAfee when reinstalling.
5. I used the DDU to reinstall my Nvidia driver from 466.11 to 465.89.
Still no joy any suggestions please as it was all working ok when suddenly I started up yesterday and low and behold I got the CRASH TO DESKTOP I had not changed anything or done anything from the night before I am baffled I want to fly.
Thanks for any help
Re: Prepar3D does not open
You need go to nVidia driver version 461.92.
Use the link above in the thread.
Jorgen
Use the link above in the thread.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
-
- Posts: 7
- Joined: Fri Feb 22, 2019 3:15 pm
Re: Prepar3D does not open
Ok thanks Jorgen will give that a try read another post which said the next Nvidia release after 466.11 should cure the problem with CTD so fingers crossed.
Many thanks
Many thanks
Re: Prepar3D does not open
Yep, the next one after 466.11 should fix it, but it has not been released yet by nVidia.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
-
- Posts: 7
- Joined: Fri Feb 22, 2019 3:15 pm
Re: Prepar3D does not open
Hi Jorgen yes Nvidia driver 461.92 worked fine, thanks a lot never had that happen to me before.
Best regards
Terry
Best regards
Terry
Re: Prepar3D does not open
I have just installed 466.11 - P3Dv5 will not open - I will try the older version 461.92 suggested above.
Re: Prepar3D does not open
OK - all good now 461.92 is back. There is a wasted morning :-(
Re: Prepar3D does not open
Believe me, a lot of us has wasted some time on this one.
Now we wait for nVidia to come up with an updated driver that works...
Jorgen
Now we wait for nVidia to come up with an updated driver that works...
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.