Hi,
I'm having trouble to move around my aircraft in "Change Location...". The default of LAT/LONG is displayed in degree, minute, second. However, the "OK" button turns grey after I dragged the aircraft icon.
I found out that it only takes LAT/LONG in degree decimal, which is weird since the updated LAT/LONG after dragging the aircraft icon is expressed in degree, minute, second.
Is there a way to change the P3D configuration so that it takes the LAT/LONG in degree, minute, second?
Thanks!
P3D V4.5 Scenario “Change Location” Problem
Re: P3D V4.5 Scenario “Change Location” Problem
@ m16881234 ,
Ok, I see the Change Location button on the opening scenario screen.
I have not seen a way to change the default setting for Lat/Lon for data entry.
****************
I searched and found this information:
http://prepar3d.com/forum/viewtopic.php?t=113171
"aeronauta » Mon, 24 Aug 2015, 20:35
in FSX it was
[Main}
LatLonFormat=Degrees
FractionalLatLonDigits=6"
Result:
*************************
Will need to test/search further.
I did a quick test and it changed the lat/lon format in the Change Location / Map.
Ok, I see the Change Location button on the opening scenario screen.
I have not seen a way to change the default setting for Lat/Lon for data entry.
****************
I searched and found this information:
http://prepar3d.com/forum/viewtopic.php?t=113171
"aeronauta » Mon, 24 Aug 2015, 20:35
in FSX it was
[Main}
LatLonFormat=Degrees
FractionalLatLonDigits=6"
Result:
*************************
Will need to test/search further.
I did a quick test and it changed the lat/lon format in the Change Location / Map.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: P3D V4.5 Scenario “Change Location” Problem
Thanks for your reply!
I might not have addressed my problem properly. The default for LAT/LONG in the input area is expressed in degrees, minutes, seconds, which is what I want it. But the "OK" button is grey unless I change the input area into degree decimal. I just want to be able to click "OK" with degrees, minutes, seconds as they are.
I try to add in these on Prepar3D.cfg file, but it doesn't work.
[Main]
LatLonFormat=Degrees, Minutes, Seconds
This is what mine looks like.
https://ibb.co/2scZQV6
I might not have addressed my problem properly. The default for LAT/LONG in the input area is expressed in degrees, minutes, seconds, which is what I want it. But the "OK" button is grey unless I change the input area into degree decimal. I just want to be able to click "OK" with degrees, minutes, seconds as they are.
I try to add in these on Prepar3D.cfg file, but it doesn't work.
[Main]
LatLonFormat=Degrees, Minutes, Seconds
This is what mine looks like.
https://ibb.co/2scZQV6
Re: P3D V4.5 Scenario “Change Location” Problem
@ m16881234 ,
How to Post Screenshots (by Chris Metel):
https://www.prepar3d.com/forum/viewtopi ... 98#p238598
I changed the default location and all ok on my setup.
Maybe do several screenshots or a video showing what your initial Map looks like when you start the sim and then your edits.
How to Post Screenshots (by Chris Metel):
https://www.prepar3d.com/forum/viewtopi ... 98#p238598
I changed the default location and all ok on my setup.
Maybe do several screenshots or a video showing what your initial Map looks like when you start the sim and then your edits.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)