CTD in UCRTBASE.DLL

[Martyson]

@ MachTwo ,

What do you suspect is causing the problem on your setup?

[MachTwo]

https://www.avsim.com/forums/topic/5882 ... nd-aigaim/

[Martyson]

@ MachTwo,

What is your test setup and your FS products in use?
What do you suspect is causing the problem on your setup, following up documenting in this forum?

[Fantrainer]

Hi

I can confirm the issue too, in my case this occurs in large airports and, especially, once the push back process starts. In addition, I could check how disabling SODE the CTDs disappear, so in my opinion, this problem is SODE related (This behavior seems to be similar to other users according to AVSIM and SODE forums).

Regards

@ Fantrainer ,

So other pilots may be able to test.
Which airports?
Which aircraft?
Which method is being used to pushback?

Can you fly into one of these airports, taxi in and do a gate arrival using SODE jetway without having a problem?

I´ve had CTD every time I´ve tried to fly from EGLL and LEMD (aerosoft), Aircraft: FSLABS A320, P3d v5.1. After disabling SODE, via Sode platform manager, no more Ctds.

Regards

[Martyson]

@ Fantrainer ,

Did you have a problem pushing back from EGLL?

[MPO910]

Jeffrey from SODE could replicate the issues due the LOGS and test we delivered to him.
At a thread at AVSIM you can read the details.
He will do some more research and inform us as soon as he has more information. It is confirmed that SODE has an issue.

[Martyson]

That's good news.
Maybe we will find out why some flights did not trigger the problem.

[pestridge77]

I have done pushback WITH SODE working, and shared a screenshot in a Prepared 5 Facebook group showing UGCX working at the same time.... I will try at other airports as well. I would highly recommend uninstalling SODE and reinstalling it and unticking AI traffic detection in the SODE menu settings. I have SODE also in Program Data and not in Program Files86x

[MPO910]

Jeffrey aka 12bPilot from SODE stated today he narrowed done the problem. Simconnect seems to have an issue and seems broken.

SODE does not work due that
ASP3D does not work due that
FSLabs has seen the issue too due that

Not good at all.
At LM.....when do we see the Hotfix?

Without a proper simconnect a lot is related and not working proper or even not at all.

Marcus

[Clifton Crane]

Hello,

We believe we have identified the cause of the crash and will have a fix in the next release.

As a workaround, you can try adding the following entry to the [SIM] section of the Prepar3D.cfg to prevent the crash:

Code: Select all

[SIM]
AdaptiveSimGroupEnable=False

Note: There should only be one [SIM] section in the Prepar3D.cfg. If the [SIM] section already exists, you only need to add AdaptiveSimGroupEnable=False.

Regards,
Clifton

[MPO910]

Hello,

We believe we have identified the cause of the crash and will have a fix in the next release.

As a workaround, you can try adding the following entry to the [SIM] section of the Prepar3D.cfg to prevent the crash:

Code: Select all

[SIM]
AdaptiveSimGroupEnable=False

Note: There should only be one [SIM] section in the Prepar3D.cfg. If the [SIM] section already exists, you only need to add AdaptiveSimGroupEnable=False.

Regards,
Clifton

Thanks for sharing. I will trY that.

Hopefully this will be in a Hotfix and not in a regular release after months or? Because this
Feature, which we disable so for now to have a workaround, is a good visible one when using AI and I do enjoy it.
Does the VR entrance where to set your HMD Refresh rate get completely deactivated by this additional entrance you proposed?

[CaptainDietz]

Hi,

just pushed back in Vienna and hat a CTD. Even though I edited my .cfg as recommended. Are you sure the workaround works?

//edit: my mistake, I edited not the .cfg but the text file. Will test now again, sorry!

[jbauzo]

I re-installed 5.1 and applied a circumvention identified by Clifton. The UCRTBASE CTD I was having is no longer occurring. The circumvention is to add the following to the P3D CFG:

[SIM]
AdaptiveSimGroupEnable=False

[ajra1966]

Hi,

I've been having CTD on pushback at EGLL (Aerosoft). I did add the line to the Prepar3D.cfg as described and then could pushback succcessfully. At the end of the fly (02:45 later) applied brakes and shutdown the engines and ... got a CTD again. There must be more in the pot than we can see ...

Let's just hope we can get a hotfix shortly as this is prevent us to execute a successfuly end to end flight. It is very frustrating to have a CTD after over 45+ minutes of flight preparation or at the end of the flight, hours later.

Regards

PS: using P3DV5.1, SODE 1.7.1, GSX L2 (updated) and FSLabs A320.

[Martyson]

Hi,

I've been having CTD on pushback at EGLL (Aerosoft). I did add the line to the Prepar3D.cfg as described and then could pushback succcessfully. At the end of the fly (02:45 later) applied brakes and shutdown the engines and ... got a CTD again. There must be more in the pot than we can see ...

Let's just hope we can get a hotfix shortly as this is prevent us to execute a successfuly end to end flight. It is very frustrating to have a CTD after over 45+ minutes of flight preparation or at the end of the flight, hours later.

Regards

PS: using P3DV5.1, SODE 1.7.1, GSX L2 (updated) and FSLabs A320.

@ ajra1966,

"At the end of the fly (02:45 later) applied brakes and shutdown the engines and ... got a CTD again."

Where was this?

Did you see an error in the Windows Event Viewer?