CTD in P3D v5 hotfix 2
CTD in P3D v5 hotfix 2
I am having CTD on P3D v5 hot 2 after a few minutes in flight.
Faulting application name: Prepar3D.exe, version: 5.0.31.35253, timestamp: 0x5eebf566
Faulty module name: g2d.dll, version: 5.0.31.35253, timestamp: 0x5eebf4f0
Exception code: 0xc0000005
Fault offset: 0x000000000010edc3
Failed process ID: 0x2c14
Failed application start time: 0x01d652d8b5b36967
Faulting application path: C: \ P3D v5 \ Prepar3D.exe
Failed module path: C: \ P3D v5 \ g2d.dll
Report ID: 137919b0-3006-48c9-ad16-39f29bde0175
Failed package full name:
Application ID for the failed package:
Any idea what happens?
Applications in use: Active Sky, ASCA, PMDG, ASA2
Windows 10 v. 2004; OctalCore Intel Core i9-9900KF, 4900 MHz (49 x 100)
GeForce RTX 2080 Ti 11GB; 32GB RAM memory; M2 1TB HD; AsRock Z390 Phantom Gaming
Faulting application name: Prepar3D.exe, version: 5.0.31.35253, timestamp: 0x5eebf566
Faulty module name: g2d.dll, version: 5.0.31.35253, timestamp: 0x5eebf4f0
Exception code: 0xc0000005
Fault offset: 0x000000000010edc3
Failed process ID: 0x2c14
Failed application start time: 0x01d652d8b5b36967
Faulting application path: C: \ P3D v5 \ Prepar3D.exe
Failed module path: C: \ P3D v5 \ g2d.dll
Report ID: 137919b0-3006-48c9-ad16-39f29bde0175
Failed package full name:
Application ID for the failed package:
Any idea what happens?
Applications in use: Active Sky, ASCA, PMDG, ASA2
Windows 10 v. 2004; OctalCore Intel Core i9-9900KF, 4900 MHz (49 x 100)
GeForce RTX 2080 Ti 11GB; 32GB RAM memory; M2 1TB HD; AsRock Z390 Phantom Gaming
Re: CTD in P3D v5 hotfix 2
I found this (possible) solution on AVSIM:
Move your dll.xml to a temporary folder and see if this fixes the problem. If you have two dll.xml's, move only one, and see if it fixes the problem. If so, the problem is in that copy of the dll.xml.
Jorgen
Move your dll.xml to a temporary folder and see if this fixes the problem. If you have two dll.xml's, move only one, and see if it fixes the problem. If so, the problem is in that copy of the dll.xml.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: CTD in P3D v5 hotfix 2
"I found this (possible) solution on AVSIM:
Move your dll.xml to a temporary folder and see if this fixes the problem. If you have two dll.xml's, move only one, and see if it fixes the problem. If so, the problem is in that copy of the dll.xml."
Jorgen
Where I find this DLL Jorgen?
Move your dll.xml to a temporary folder and see if this fixes the problem. If you have two dll.xml's, move only one, and see if it fixes the problem. If so, the problem is in that copy of the dll.xml."
Jorgen
Where I find this DLL Jorgen?
Re: CTD in P3D v5 hotfix 2
It is located in your \config\SimConnect folder under where you installed the SDK.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: CTD in P3D v5 hotfix 2
I did the procedure that was recommended here but the problem remains.
Re: CTD in P3D v5 hotfix 2
Exactly the same issue here. Started to happen after hotfix 2 installation.
Few minutes into flight CTD. However in the windows event log I see that there is a .NET error before the g2d.dll crash.
It doesn't matter which aircraft or if active sky is running or not.
Few minutes into flight CTD. However in the windows event log I see that there is a .NET error before the g2d.dll crash.
It doesn't matter which aircraft or if active sky is running or not.
Re: CTD in P3D v5 hotfix 2
onurair wrote: ↑Mon Jul 06, 2020 9:01 am Exactly the same issue here. Started to happen after hotfix 2 installation.
Few minutes into flight CTD. However in the windows event log I see that there is a .NET error before the g2d.dll crash.
It doesn't matter which aircraft or if active sky is running or not.
I see a framework error first.
Application: Prepar3D.exe
Framework version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Information: exception code c0000005, exception address 00007FFCD785EDC3
Re: CTD in P3D v5 hotfix 2
I see in another post that the module g2d.dll is causing this problem. Which is the same module as my case.
This started after installing hotfix 2, hotfix 1 was ok.
This started after installing hotfix 2, hotfix 1 was ok.
Re: CTD in P3D v5 hotfix 2
The exception code of 0xc0000005 points to someone doing something very bad, writing to an area of memory that he does not have permission to write to.
Usually this comes down to incompatible or badly programmed add-ons.
So, what add-ons do you have installed here?
Jorgen
Usually this comes down to incompatible or badly programmed add-ons.
So, what add-ons do you have installed here?
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: CTD in P3D v5 hotfix 2
JorgenSA wrote: ↑Mon Jul 06, 2020 3:19 pm The exception code of 0xc0000005 points to someone doing something very bad, writing to an area of memory that he does not have permission to write to.
Usually this comes down to incompatible or badly programmed add-ons.
So, what add-ons do you have installed here?
Jorgen
Add-ons in use: Active Sky, ASCA, PMDG, ASA2 and Orbx
Only add-on that was installed after hotfix 2 = 737ng PMDG
Re: CTD in P3D v5 hotfix 2
Bucket failure, type 0
Event Name: APPCRASH
Answer: Not available
CAB ID: 0
Problem signature:
P1: Prepar3D.exe
P2: 5.0.31.35253
P3: 5eebf566
P4: g2d.dll
P5: 5.0.31.35253
P6: 5eebf4f0
P7: c0000005
P8: 000000000010edc3
P9:
P10:
Attached files:
These files may be available at:
\\? \ C: \ ProgramData \ Microsoft \ Windows \ WER \ ReportQueue \ AppCrash_Prepar3D.exe_43f9b74c211c7310e24a711e1175c3d5ae1cc90_9be4e996_c39cba71-6438-4680-b5ac-57f8ce7d0bbc
Analysis symbol:
Checking again for a solution: 0
Report ID: 1fd2e88c-af24-4092-b132-d639bbb5ef1b
Report Status: 4
Hash Bucket: CAB Guid: 0
Event Name: APPCRASH
Answer: Not available
CAB ID: 0
Problem signature:
P1: Prepar3D.exe
P2: 5.0.31.35253
P3: 5eebf566
P4: g2d.dll
P5: 5.0.31.35253
P6: 5eebf4f0
P7: c0000005
P8: 000000000010edc3
P9:
P10:
Attached files:
These files may be available at:
\\? \ C: \ ProgramData \ Microsoft \ Windows \ WER \ ReportQueue \ AppCrash_Prepar3D.exe_43f9b74c211c7310e24a711e1175c3d5ae1cc90_9be4e996_c39cba71-6438-4680-b5ac-57f8ce7d0bbc
Analysis symbol:
Checking again for a solution: 0
Report ID: 1fd2e88c-af24-4092-b132-d639bbb5ef1b
Report Status: 4
Hash Bucket: CAB Guid: 0
Re: CTD in P3D v5 hotfix 2
In another thread, I saw that PMDG just has released v. 5 fixes for some of their aircraft. That is worth checking.
Active Sky is still in beta, and may cause issues.
Jorgen
Active Sky is still in beta, and may cause issues.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: CTD in P3D v5 hotfix 2
@ Pelium19,Pelium19 wrote: ↑Mon Jul 06, 2020 3:22 pmJorgenSA wrote: ↑Mon Jul 06, 2020 3:19 pm The exception code of 0xc0000005 points to someone doing something very bad, writing to an area of memory that he does not have permission to write to.
Usually this comes down to incompatible or badly programmed add-ons.
So, what add-ons do you have installed here?
Jorgen
Add-ons in use: Active Sky, ASCA, PMDG, ASA2 and Orbx
Only add-on that was installed after hotfix 2 = 737ng PMDG
Was that PMDG737NG ?
or
PMDG737NGXu for P3Dv5HF2?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: CTD in P3D v5 hotfix 2
PMDG 737NGXu for P3Dv5HF2Martyson wrote: ↑Mon Jul 06, 2020 4:32 pm@ Pelium19,Pelium19 wrote: ↑Mon Jul 06, 2020 3:22 pmJorgenSA wrote: ↑Mon Jul 06, 2020 3:19 pm The exception code of 0xc0000005 points to someone doing something very bad, writing to an area of memory that he does not have permission to write to.
Usually this comes down to incompatible or badly programmed add-ons.
So, what add-ons do you have installed here?
Jorgen
Add-ons in use: Active Sky, ASCA, PMDG, ASA2 and Orbx
Only add-on that was installed after hotfix 2 = 737ng PMDG
Was that PMDG737NG ?
or
PMDG737NGXu for P3Dv5HF2?