Daniel Paid £1200 for the i9 alone Sorry, that was to reflect the pc without graphics, so case, CPU, PSU board, ram, fans etc I'll try and get some tests done this week and get them on YouTube for the extra points you mentioned :D in another post. I'm more than happy at how the pc is running with v4...

Daniel You could downgrade the Nvidia and go for the RX 5700xt which I have (they are essentially the same as the Nvidia 2070ti) but a lot cheaper. This is what I did, and you won't be disappointed on frames. I built the I9 9900k on a budget of £1500, 16gb at 3200mhz+ is good, 32gb if you can afford...

What's your budget?

Very True Jorgen and again very true CplDaniel and based on that, I have no mods in the CFG file at all. I run 2x 27" LCDs on the RX5700xt setup with eyfinity on those I run 3 other 1366x768 monitors for my panels and 1 10" USB Touch Screen monitor for the CDU, I have Orbx Base, Europe, Sc...

Thanks Jorgen Is it user preference wether to keep hyperthreading enabled or not? New pc is working perfectly, only issue I've found wAs last night it was very misty in Edinburgh, as I looked out my left window, there was heavy blocks (thick lines) of mist, wasn't smoothed out like usual. Not sure i...

Hi guys

New pc is here and running and hitting frames in excess of 114fps on a single monitor at the moment whilst still setting up, so far, very impressed.

Any recommendations for the AffinityMask settings for the i9 9900k? Use it or not? If so, what number

Sorry, it was 2am when I wrote this in my bed and didn't have the link. The video I used to help setup view group was https://www.youtube.com/watch?v=kUCJEPHeB3k Far better than using eyfinity, however, I will try again today using eyfinity and the full screen mode to see if I get the same results. ...

Hi Guys As some of you may know I posted here a while ago complaining I was getting about 10 - 20 fps at Edinburgh with default settings, here my spec Fx-8350 2x RX580 32gb 2600mhz ram 1tb HDD at 7200rpm I was told the memory is to slow, the CPU is too old and the video card is ok and that's the cau...

Case PCS SR-819 RGB FULL TOWER CASE Overclocked CPU Overclocked AMD Threadripper 1900X 8 Core (3.8GHz @ up to 4.0GHz) Motherboard ASUS® PRIME X399-A (DDR4, 6Gb/s, CrossFireX/SLI) - RGB Ready! Memory (RAM) 16GB Corsair VENGEANCE DDR4 3200MHz (2 x 8GB) Graphics Card 8GB AMD RADEON™ RX 5700 XT - HDMI, ...

Thanks Jorgen

So you would favour the AMD over the I9?

and you confirm that FPS is slightly better

How would the below favour against the i9 instead, only reason as its 4.2 stock speed, and the MB has 4x GPU which I think could be helpful as its, 2 @ 16x mode and 2 @ 8x, meaning I'll get the full 16x speed on both cards, although my 2nd GPU is only for undocked panel windows, so not high performa...

Hi Guys Thanks for all the input so far. PC Has been ordered, but I've since been advised to change the CPU to AMD Ryzen 9 3900x as its base speed is 3.8 boosting to 4.6 and has the PCI-E 4.0, also told with the AMD RX 5700 XT I'll get better frames with a full AMD system Anyone any info on this.. H...

Hi Jorgen

The PC is liquid cooled and been told by the shop that it will easily clock to 4.8 / 5 with what I have, no warranty affected as this is done for me in the shop. The only thing they won't clock is the graphics, but I don't think I need it

Hi Guys Building a new pc to run P3d V4.2 This is what I've picked Case PCS GENESIS G1B CASE + SD CARD READER Processor (CPU) Intel® Core™ i9 Eight Core Processor i9-9900K (3.6GHz) 16MB Cache Motherboard Gigabyte Z390 UD: ATX, LG1151, USB 3.1, SATA 6GBs - RGB Ready Memory (RAM) 16GB Corsair VENGEANC...

Thanks for that..

What about graphics? Stick with the RX580's that I have or change these for the more expensive rtx 2060 / 1070 or 1080?