I am running Prepar3D on a 3 projector system. After I load Prepar3D,
how can I minimize the screen after Prepar 3D has load in order to run my ActiveSky program?
How to minimize the screen in order to run 3rd party program
-
- Posts: 147
- Joined: Mon Jun 12, 2017 3:12 am
- Location: YSCB
Re: How to minimize the screen in order to run 3rd party program
Does 'Alt+Spacebar' then 'n' work for you? Take you back to the desktop?
Aussie
Aussie
P3d V6: ProSim-AR B737 suite: Fully enc. 737 Cockpit:
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
Re: How to minimize the screen in order to run 3rd party program
I seem to remember from the old FSX days, that you start Active Sky first, then the sim.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
-
- Posts: 147
- Joined: Mon Jun 12, 2017 3:12 am
- Location: YSCB
Re: How to minimize the screen in order to run 3rd party program
You are correct Jorgan. You should start ActiveSky 6 first (and close last) but I think Carl wants to be able to then select the running Active sky and have it displayed on top of his surround outside view.
In my case, I have the bottom task bar visible on one of my four outside monitors and can select the Acive Sky icon from there.
Aussie
In my case, I have the bottom task bar visible on one of my four outside monitors and can select the Acive Sky icon from there.
Aussie
P3d V6: ProSim-AR B737 suite: Fully enc. 737 Cockpit:
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
Re: How to minimize the screen in order to run 3rd party program
Thank you for the suggestions. I will give it a try.
Again thanks,
Carl
Again thanks,
Carl
Re: How to minimize the screen in order to run 3rd party program
Aactive Sky can be started before or after P3D is started.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
-
- Posts: 147
- Joined: Mon Jun 12, 2017 3:12 am
- Location: YSCB
Re: How to minimize the screen in order to run 3rd party program
Of course, you can start ActiveSky later but, if you have ActiveSky live weather saved in your default scenario, and you want to have your aircraft appear at your gate your current outside weather, QNH, etc., it naturally follows to start ActiveSky weather first.
Aussie
Aussie
P3d V6: ProSim-AR B737 suite: Fully enc. 737 Cockpit:
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.