Hello,
When loading the above A/C from the P3D A/C selection menu I get a message that says its an error
This wx IS LOCKED
c\prepar3dv4\simobjects\airplanes\cs_l-1011\csy112.air
Any one help me with resolution or what this means
Thanks
Charlie McEwan
P3Dv4.5 /Win 10 64 bit
Loading CS L1011
Loading CS L1011
Best Regards
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Re: Loading CS L1011
The obvious place to ask is Support at Captain Sim.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Loading CS L1011
I did no response
Charlie
Charlie
Best Regards
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Re: Loading CS L1011
MACHAVIA wrote: ↑Wed Dec 18, 2019 2:48 pm Hello,
When loading the above A/C from the P3D A/C selection menu I get a message that says its an error
This wx IS LOCKED
c\prepar3dv4\simobjects\airplanes\cs_l-1011\csy112.air
Any one help me with resolution or what this means
Thanks
Charlie McEwan
P3Dv4.5 /Win 10 64 bit
Charlie,
Is this the same type of problem you posted with the Carenado KingAir?
https://www.prepar3d.com/forum/viewtopi ... 67#p205267
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Loading CS L1011
Yes
Charlie
Charlie
Best Regards
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Re: Loading CS L1011
No Unfortunately not.
Charlie
Charlie
Best Regards
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Re: Loading CS L1011
No Should it be, I just get the normal selection menu up which shows the A/C you mention in the box I then just select A/C & Airports from that menu.
Charlie
Charlie
Best Regards
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit
Charlie McEwan
P3D V4.5 / Intel (R)Core TM i7-8700KCPU @3.70GHz3.70GHZ / Installed RAM 16GB 15.9 USEABLE / (12 Cores)
Graphics Card Nvidia GeForceGTX 1070Ti 0.0 Win 10 Home / 64 bit