Hi,
I´m looking for new PC and I would like to know what hardware is better to Prepard3d v4 in this list below:
1) Ryzen 5 2600, 8GB Ram, SSD 240GB and video card RX570 8GB
2) I3 8100, 8GB ram, SSD 240GB and video card GTX1060 3GB
3) I5 7400, 8GB Ram, SSD 240GB and video card GTX1060 6GB.
What is better: Ryzen 5 2600, I3 8100 or I5 7400
-
- Posts: 2
- Joined: Tue Nov 06, 2018 4:14 pm
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: What is better: Ryzen 5 2600, I3 8100 or I5 7400
Have a look at sites like CPUBenchmark.net
The Ryzen 5 2600 has a CPU score of 14342
The i3-8100 has a score of 8093
The i5-7400 has 7349
So that's pretty clear for the Ryzen
https://www.videocardbenchmark.net/
RX 570 6,753
GTX 1060 9,013
So that's the problem. You have a good cpu with weak gpu und weak cpu with better gpu but low gpu memory. I'd go for the Ryzen because P3D4 is still very much depending on cpu power.
I also checked on hwcompare.com. http://www.hwcompare.com/33679/geforce- ... on-rx-570/
It's slightly better for the RX570. So that points now to the Ryzen system.
Dan
The Ryzen 5 2600 has a CPU score of 14342
The i3-8100 has a score of 8093
The i5-7400 has 7349
So that's pretty clear for the Ryzen
https://www.videocardbenchmark.net/
RX 570 6,753
GTX 1060 9,013
So that's the problem. You have a good cpu with weak gpu und weak cpu with better gpu but low gpu memory. I'd go for the Ryzen because P3D4 is still very much depending on cpu power.
I also checked on hwcompare.com. http://www.hwcompare.com/33679/geforce- ... on-rx-570/
It's slightly better for the RX570. So that points now to the Ryzen system.
Dan
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods
-
- Posts: 2
- Joined: Tue Nov 06, 2018 4:14 pm
Re: What is better: Ryzen 5 2600, I3 8100 or I5 7400
Thanks for the reply Dan!
I bought Ryzen 5 2600! Now I´m thinking about this question... to buy a new GTX1060 6GB or a used GTX1070 8GB?!?!
I expect both video card could be very good using prepard3d
I bought Ryzen 5 2600! Now I´m thinking about this question... to buy a new GTX1060 6GB or a used GTX1070 8GB?!?!
I expect both video card could be very good using prepard3d
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: What is better: Ryzen 5 2600, I3 8100 or I5 7400
I have a ASUS GTX1080 with 8GB memory and I'm very happy with it. When the new TI version became available the prizes went down. I use a aged i3770K processor overclocked at 4.3 GHz and till now I'm pretty happy with this combination. But now, the 9th generation processors coming I think about buying a new system. Too bad, all addons have to be uninstalled and reinstalled again because of registration.
Dan
Dan
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods
Re: What is better: Ryzen 5 2600, I3 8100 or I5 7400
I changed out my mobo, CPU, memory and video cards in Feb 2018 and I do not recall having to reinstall anything. It is possible I had to reactivate the P3D license and reactivate the FSDT products but those are just button pushes and I wouldn't remember.... the update to my system was rather painless. I did not change out any drives.Blaunarwal wrote: ↑Sun Nov 11, 2018 3:43 pm I have a ASUS GTX1080 with 8GB memory and I'm very happy with it. When the new TI version became available the prizes went down. I use a aged i3770K processor overclocked at 4.3 GHz and till now I'm pretty happy with this combination. But now, the 9th generation processors coming I think about buying a new system. Too bad, all addons have to be uninstalled and reinstalled again because of registration.
Dan
Dan Downs
KCRP
KCRP
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: What is better: Ryzen 5 2600, I3 8100 or I5 7400
Interesting, I think a lot of addons register on a hardware ID wich is changed updating the CPU or MB. FSDT has a good way to keep things easy. Do you have also Carenado, Captainsim, Leonardo, PMDG, Aerosoft, Justsim, etc. addons?I changed out my mobo, CPU, memory and video cards in Feb 2018 and I do not recall having to reinstall anything. It is possible I had to reactivate the P3D license and reactivate the FSDT products but those are just button pushes and I wouldn't remember.... the update to my system was rather painless. I did not change out any drives.
Maybe keeping the drives and threrefore the OS and registry reduced the need to reregister. I thought I keep one system running until everything is migrated, uninstalling and installing one by one every day.
But what is even more important, when will the next big update for P3D be? I guess 5.0 requieres a new install, maybe also addon updates. That would be the right time to set up a new system.
Dan
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods