I cannot recall ... been a long time for me, did your FSUIPC free version do rudder assignments / calibration?
Rudder problem
Re: Rudder problem
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Rudder problem
LOL... my memory sucks that way also
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Rudder problem
Was wondering why you mentioned:
"My joystick worked right out of the box, as I said. However, since then I have installed the drivers for it from the Thrustmaster site, and also FSUIPC 5 (mine is the paid version, you could try the free version for now)."
I did not recall FSUIPC free version doing the rudder.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Rudder problem
That is why I said TRY. It couldn't hurt.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Rudder problem
That is what I was wondering about.
What in the FSUIPC free version did you think was going to help the rudder problem?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Rudder problem
I could not remember it, but thought it could calibrate.... at least I remember you can reassign with the free version
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Rudder problem
Maybe the OP or jpescobar (in the other post reply ) can check it out.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Rudder problem
Hi
My Saitech Rudder Pedals wont work.
I did mention it before on the Forum but matter was not resolved so let me start over.
The pedals work in FSX SE
I have uninstalled the drivers and re installed them.
The main problem is that I do not have sufficient computer knowledge to go digging around
I do not even know how to use FSUIPC.
So if any one can help (who has the patience to deal with an old man) Please help.
Regards
My Saitech Rudder Pedals wont work.
I did mention it before on the Forum but matter was not resolved so let me start over.
The pedals work in FSX SE
I have uninstalled the drivers and re installed them.
The main problem is that I do not have sufficient computer knowledge to go digging around
I do not even know how to use FSUIPC.
So if any one can help (who has the patience to deal with an old man) Please help.
Regards
Re: Rudder problem
Which P3Dxxx version are you using ?3221807 wrote: ↑Sun May 17, 2020 3:09 pm Hi
My Saitech Rudder Pedals wont work.
I did mention it before on the Forum but matter was not resolved so let me start over.
The pedals work in FSX SE
I have uninstalled the drivers and re installed them.
The main problem is that I do not have sufficient computer knowledge to go digging around
I do not even know how to use FSUIPC.
So if any one can help (who has the patience to deal with an old man) Please help.
Regards
Do you have a Yoke and throttles in your setup?
Do you have other flight sim hardware products in your setup?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Rudder problem
Hi
P3Dv4.5
I do have a yoke and throttle but have disconnected them relying only on my Logitech Extreme Pro 3D joystick.
I have no other hardware
P3Dv4.5
I do have a yoke and throttle but have disconnected them relying only on my Logitech Extreme Pro 3D joystick.
I have no other hardware