error messages
error messages
Hi - I just acquired P3D v4.3 and have made a few flights. On exit from the program I was referred to error messages as follow:
[error.0]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.1]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.2]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.3]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.4]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.5]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.6]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.7]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.8]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.9]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.10]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.11]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.12]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
What is going on? I noticed no apparent anomalies during the flights.
[error.0]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.1]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.2]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.3]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.4]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.5]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.6]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.7]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.8]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.9]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.10]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.11]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.12]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
What is going on? I noticed no apparent anomalies during the flights.
- Kayla Dillon
- Posts: 1316
- Joined: Mon Aug 01, 2016 5:59 pm
Re: error messages
Hello,
These content errors are meant for developers. So if you're not seeing any issues, you likely don't have to worry about it.
It is likely an addon that is causing these errors. If you can narrow down which addon is causing it, you can report the issue to the developer of that addon.
You can also disable content error reporting by unchecking the box Options->General->Enable Content Error Reporting.
Regards,
Kayla
These content errors are meant for developers. So if you're not seeing any issues, you likely don't have to worry about it.
It is likely an addon that is causing these errors. If you can narrow down which addon is causing it, you can report the issue to the developer of that addon.
You can also disable content error reporting by unchecking the box Options->General->Enable Content Error Reporting.
Regards,
Kayla
Prepar3D® Software Engineer
Re: error messages
Hello, it shouldn't be too hard for P3D staff to recognise one of their own default aircraft
from the texture names.
from the texture names.
Re: error messages
Thanks for your answers. The installation is brand new with no add-ons, the errors stem from a few initial test flights.
- Kayla Dillon
- Posts: 1316
- Joined: Mon Aug 01, 2016 5:59 pm
Re: error messages
Hello,
Which aircraft are you flying when you see these errors?
Regards,
Kayla
Prepar3D® Software Engineer
Re: error messages
It looks like the L-049.
The textures are missing here also.
George
The textures are missing here also.
George
Re: error messages
Kayla Kinzel wrote: ↑Tue Jul 17, 2018 12:13 pmHello,
Which aircraft are you flying when you see these errors?
Regards,
Kayla
Sorry - I can't remember for sure. I did 3 flights now using the P3 Cub, the Bonanza A36 and the King Air 350 and got no error reports (I have not turned them off). Will come back if any more errors are reported. Thanks for your quick response!
Re: error messages
OK - I did a half hour flight in the Connie, which ended in a crash (my fault). I can't believe the resulting error report listed below. The Connie is new to me, so I am not an experienced observer, but again I did not notice any malfunctions or graphic problems.
[error.0]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.1]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.2]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.3]
error=Invalid Texture name "DDS" specified for model "connie_interior_749".
[error.4]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: ConRadio2D\AH_Mosradio_nav_2_power_annunciator_off.bmp
[error.5]
error=C-style gauge failed to load: C:\Lockheed Martin\Prepar3D v4\Gauges\squeaking brakes_Sound.dll, Gauge: dsd_xml_sound3. DLL is 32 bit. A 64 bit version is required.
[error.6]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: Con_Gauges\AH_Mosradio_nav_2_power_annunciator_off.bmp
[error.7]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: Con_Gauges\radio_signal_gauge_switch.bmp
[error.8]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS12
Error: Missing gauge image file: Airspeed\Engine_Shadow_Alpha.bmp
[error.9]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS34
Error: Missing gauge image file: Airspeed\Engine_Shadow_Alpha.bmp
[error.10]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS12
Error: Missing gauge image file: AIRSPEED\Engine_Shadow_Alpha.bmp
[error.11]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS34
Error: Missing gauge image file: AIRSPEED\Engine_Shadow_Alpha.bmp
[error.12]
error=file "cranking(.wav|.ogg)" not found
[error.13]
error=file "CON_door_open(.wav|.ogg)" not found
[error.14]
error=file "CON_door_close(.wav|.ogg)" not found
[error.15]
error=C-style gauge failed to load: C:\Lockheed Martin\Prepar3D v4\Gauges\squeaking brakes_Sound.dll, Gauge: dsd_xml_sound3. DLL is 32 bit. A 64 bit version is required.
[error.16]
error=Texture JF_CON_WING2VCUNDER_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.17]
error=Texture AH_P38F_VC4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.18]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.19]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.20]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.21]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.22]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.23]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.24]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.25]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.26]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.27]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.28]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.29]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.30]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.31]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.32]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.33]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.34]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.35]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.36]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.37]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.38]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.39]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.40]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.41]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.42]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.43]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.44]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.45]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.46]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.47]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.48]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.49]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.50]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.51]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.52]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.53]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.54]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.55]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.56]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.57]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.58]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.59]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
Do I have a faulty installation?
[error.0]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.1]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.2]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.3]
error=Invalid Texture name "DDS" specified for model "connie_interior_749".
[error.4]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: ConRadio2D\AH_Mosradio_nav_2_power_annunciator_off.bmp
[error.5]
error=C-style gauge failed to load: C:\Lockheed Martin\Prepar3D v4\Gauges\squeaking brakes_Sound.dll, Gauge: dsd_xml_sound3. DLL is 32 bit. A 64 bit version is required.
[error.6]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: Con_Gauges\AH_Mosradio_nav_2_power_annunciator_off.bmp
[error.7]
error=Gauge/Script Error
Type: Gauge
Name: AH_ConRadio
Error: Missing gauge image file: Con_Gauges\radio_signal_gauge_switch.bmp
[error.8]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS12
Error: Missing gauge image file: Airspeed\Engine_Shadow_Alpha.bmp
[error.9]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS34
Error: Missing gauge image file: Airspeed\Engine_Shadow_Alpha.bmp
[error.10]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS12
Error: Missing gauge image file: AIRSPEED\Engine_Shadow_Alpha.bmp
[error.11]
error=Gauge/Script Error
Type: Gauge
Name: MANPRESS34
Error: Missing gauge image file: AIRSPEED\Engine_Shadow_Alpha.bmp
[error.12]
error=file "cranking(.wav|.ogg)" not found
[error.13]
error=file "CON_door_open(.wav|.ogg)" not found
[error.14]
error=file "CON_door_close(.wav|.ogg)" not found
[error.15]
error=C-style gauge failed to load: C:\Lockheed Martin\Prepar3D v4\Gauges\squeaking brakes_Sound.dll, Gauge: dsd_xml_sound3. DLL is 32 bit. A 64 bit version is required.
[error.16]
error=Texture JF_CON_WING2VCUNDER_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.17]
error=Texture AH_P38F_VC4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.18]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.19]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.20]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.21]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.22]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.23]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.24]
error=Texture JF_CON_FUSE4_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.25]
error=Texture AH_CONREDLENS_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.26]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.27]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.28]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.29]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.30]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.31]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.32]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.33]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.34]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.35]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.36]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.37]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.38]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.39]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.40]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.41]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.42]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.43]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.44]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.45]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.46]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.47]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.48]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.49]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.50]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.51]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.52]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.53]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.54]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.55]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
[error.56]
error=Texture DDS failed to load (FE_REQUEST_STATUS==13)
[error.57]
error=Texture JF_CONNIE_CABIN2_LM.DDS failed to load (FE_REQUEST_STATUS==13)
[error.58]
error=Texture JF_CONSUNVISOR_T.DDS failed to load (FE_REQUEST_STATUS==13)
[error.59]
error=Texture AH_CONCONNIE_GLASS_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)
Do I have a faulty installation?
- Kayla Dillon
- Posts: 1316
- Joined: Mon Aug 01, 2016 5:59 pm
Re: error messages
Hello johnost,
Thanks for the report. I'll make a ticket to analyze our default aircrafts. For now, feel free to disable content error reporting.
Regards,
Kayla
Thanks for the report. I'll make a ticket to analyze our default aircrafts. For now, feel free to disable content error reporting.
Regards,
Kayla
Prepar3D® Software Engineer
Re: error messages
Thanks everybody for your quick responses. I am curious to know what all these errors mean, and if my installation has problems.
- Kayla Dillon
- Posts: 1316
- Joined: Mon Aug 01, 2016 5:59 pm
Re: error messages
Hello,
Your installation is likely fine. These errors are on our end.
Regards,
Kayla
Your installation is likely fine. These errors are on our end.
Regards,
Kayla
Prepar3D® Software Engineer