Strange content error related to AI aircraft

[windshearDK]

A new message is appearing in form of an error.

I have not tampered with anything as far as I am concerned, and I was looking the error log through, because I have certain airports where AI is totally absent for some reason, most likely an error in the cfg. file of one or more.

these are the errors, it refers to gauges, yet its an AI aircraft, so I don't understand that it refers to gauges:

error=Found Duplicate Key Name
File:E:\Prepar3D v4\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_WAT\aircraft.cfg
Section:contact_points
Key:max_number_of_points

[error.175]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Copyright (C) 2016 FSPXAI fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.176]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid variable (missing : - did you forget a macro?): C

[error.177]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "FSPXAI fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.178]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.179]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.180]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.181]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid variable (missing : - did you forget a macro?): FSpainter

[error.182]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.183]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Kagoshima, Japan missiutk@gmail.com
"

[error.184]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "Japan missiutk@gmail.com
"

[error.185]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI Airbus A330-300 Garuda Indonesia
Error: Invalid script (no command is more than 4 characters): "missiutk@gmail.com
"

[error.269]
error=Gauge/Script Error
Type: Visibility Script
Name: SPAI A330-300 RR AirAsiaX 9M-XXD old color white Tail red cross
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "}}" in: }}

[error.627]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Need units for (A:TRAILING EDGE FLAPS RIGHT ANGLE)

[error.628]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Copyright (C) 2016 FSPXAI fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.629]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid variable (missing : - did you forget a macro?): C

[error.630]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "FSPXAI fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.631]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "fspxai@gmail.com Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.632]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Mitsushi Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.633]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Yutaka (FSpainter) Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.634]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid variable (missing : - did you forget a macro?): FSpainter

[error.635]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Amami, Kagoshima, Japan missiutk@gmail.com
"

[error.636]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Kagoshima, Japan missiutk@gmail.com
"

[error.637]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "Japan missiutk@gmail.com
"

[error.638]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid script (no command is more than 4 characters): "missiutk@gmail.com
"

[error.639]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Undefined Simulation Variable: "AI TRAFFIC STATE".

[error.640]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid variable name: "AI TRAFFIC STATE"

[error.641]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Invalid octal value: "000032C10 > if{ (A:TRAILING EDGE FLAPS RIGHT ANGLE) } els{ 0 }
"

[error.642]
error=Gauge/Script Error
Type: Visibility Script
Name: FSPXAI AeroLogic Boeing 777-2ZN(LRF)
Error: Need units for (A:TRAILING EDGE FLAPS RIGHT ANGLE)

[azwildk4t]

Did you ever get a response? I use psxseecontraffic and one suggestion was to look for Content Errors. I did so but also unsure what to do next.

[Martyson]

Did you ever get a response? I use psxseecontraffic and one suggestion was to look for Content Errors. I did so but also unsure what to do next.

Are you using Traffic Tool Box?

Are you using default P3D AI aircraft traffic?

[azwildk4t]

Are you using Traffic Tool Box?

No. I use Real Traffic and PSXseeconTraffic (https://www.lekseecon.nl/PSXseeconTraffic.html)

Are you using default P3D AI aircraft traffic?

No. I am using traffic from Boston Virtual ATC (http://www.bvartcc.com)

[Martyson]

Are you using Traffic Tool Box?

No. I use Real Traffic and PSXseeconTraffic (https://www.lekseecon.nl/PSXseeconTraffic.html)

Are you using default P3D AI aircraft traffic?

No. I am using traffic from Boston Virtual ATC (http://www.bvartcc.com)

You could try the default P3D AI traffic and Traffic Tool Box to verify your default P3D setup is working / installed ok.

Edit:
The P3D general debugging steps are here:
https://www.prepar3d.com/forum/viewtopi ... 2&t=123246

[azwildk4t]

Thanks for the info.

[Martyson]

You are welcome.

I no nothing about the two products you are using.

Have you contacted the add-on product developers for support?

[bluestar]

Did you ever get a response? I use psxseecontraffic and one suggestion was to look for Content Errors. I did so but also unsure what to do next.

What are the AIL Generator error reports telling you?

[azwildk4t]

Did you ever get a response? I use psxseecontraffic and one suggestion was to look for Content Errors. I did so but also unsure what to do next.

What are the AIL Generator error reports telling you?

I did review the ContentErrors from P3D and resolved those. Most of them were duplicate keys in the config files so I just removed the duplicates like ui_variation. Now I am working to resolve the errors from AILGenerator.