All scenery's became blurry!!
-
- Posts: 3
- Joined: Sun Jul 12, 2015 9:41 am
All scenery's became blurry!!
Hello, i just wanted to ask if anyone else is having this issue... I upgraded to 3.3 just but installing the client part and all good. However, my uk2000 airports for some reason turned blurry.
Re: All scenery's became blurry!!
Did any other scenery (default or add-on) become blurry? Do you have vsync enabled? What graphics card and drivers are you using? Are you using any add-ons aside from scenery?
- Mike
- Mike
Re: All scenery's became blurry!!
Hi,
+1 for this problem..
I did a full Re-install and all UK2000 airports have a blurry ground texture, no taxiway or runway markings and the jetways are sunk into the ground at EGCC.
Also problems with taxiway/runway markings at Flytampa Athens
Only airport working without problems so far is FSDG Thessaloniki!
ASN not working with V3.3 but Opus FSI is
REX is working fine
GSX problems when selecting De-boarding/Boarding, but Push back + Fueling works fine
Addons used:
- ORBX Global+Vector+Open LC Europe
- FTX England
+1 for this problem..
I did a full Re-install and all UK2000 airports have a blurry ground texture, no taxiway or runway markings and the jetways are sunk into the ground at EGCC.
Also problems with taxiway/runway markings at Flytampa Athens
Only airport working without problems so far is FSDG Thessaloniki!
ASN not working with V3.3 but Opus FSI is
REX is working fine
GSX problems when selecting De-boarding/Boarding, but Push back + Fueling works fine
Addons used:
- ORBX Global+Vector+Open LC Europe
- FTX England
Re: All scenery's became blurry!!
Tried running Vector AEC again?Marsden94 wrote: ...
- ORBX Global+Vector+Open LC Europe
- FTX England
Win10 / 7900X@4.7 / 32GB / 2x1080Ti SLI / 3x 4K 40" Samsung
Orbx FTX Global Base + Vector + FS Global + UTX USA
REX Texture Direct + AS2016 + ASCA
Saitek X56 + Thrustmaster T.Flight Rudder Pedals
Orbx FTX Global Base + Vector + FS Global + UTX USA
REX Texture Direct + AS2016 + ASCA
Saitek X56 + Thrustmaster T.Flight Rudder Pedals
-
- Posts: 3
- Joined: Sun Jul 12, 2015 9:41 am
Re: All scenery's became blurry!!
SPECS :
I7 4790K @4.6 GHZ
GTX 970
16GB RAM
250GB SSD
2TB SSHD
Default airports are fine, its addon scenery which is the problem...
What i will do is re-install uk2000 airports and see if its fixes the problem, Once i done that then i will get back to you guys.
I7 4790K @4.6 GHZ
GTX 970
16GB RAM
250GB SSD
2TB SSHD
Default airports are fine, its addon scenery which is the problem...
What i will do is re-install uk2000 airports and see if its fixes the problem, Once i done that then i will get back to you guys.
Re: All scenery's became blurry!!
Yes I've tried.. No success :/DukeSan27 wrote:Marsden94 wrote: ...
Tried running Vector AEC again?
Hope someone can get to the bottom of this!
Re: All scenery's became blurry!!
Hi,
i have same problem in uk2000 EGCC (for now test only this)...ground is orrible...no problem in 3.1 or 3.2.
i have same problem in uk2000 EGCC (for now test only this)...ground is orrible...no problem in 3.1 or 3.2.
Re: All scenery's became blurry!!
...and now...test EGSS...and same problem :(
-
- Posts: 3
- Joined: Sun Jul 12, 2015 9:41 am
Re: All scenery's became blurry!!
Also the problem occurs in flytampa airports :-(
Re: All scenery's became blurry!!
Can someone please test with Tessellation off and let us know if that solves this?
Re: All scenery's became blurry!!
Test without tessellation enabled...but don't resolve problem.
Re: All scenery's became blurry!!
Thanks for trying that.
Re: All scenery's became blurry!!
I too have similar problems with blurry scenery. I have tried tessellations ON/OFF without any resolve. I have also tried Vsync ON/OFF and HT-ON/OFF also without resolve. Their is no resolve either in the 3.3.5 update.
Very disappointed.
Very disappointed.
Michael.
P3Dv5.2-Win10/64,i7/6700,16GbRAM, SSD's, GTX1080
P3Dv5.2-Win10/64,i7/6700,16GbRAM, SSD's, GTX1080
Re: All scenery's became blurry!!
Sorry for my late handsup,
I had this issue once with P3D2.5. After endless Research I discovered texture filtering set to "trilinear" instead of anisotropic 8x under Option> Settings> Scenery> Texture Filtering.
Make sure you delete your shader Cache after any changes of that Setting.
I had this issue once with P3D2.5. After endless Research I discovered texture filtering set to "trilinear" instead of anisotropic 8x under Option> Settings> Scenery> Texture Filtering.
Make sure you delete your shader Cache after any changes of that Setting.
intel 9900K @ 5.0GHz (Cache @ 4.7GHz), HT Off, RTX3090, Win10, 64-Bit, 32GB RAM @ 3200MHz
Re: All scenery's became blurry!!
Thanks, I'll try that today and let you know the results.
Michael.
P3Dv5.2-Win10/64,i7/6700,16GbRAM, SSD's, GTX1080
P3Dv5.2-Win10/64,i7/6700,16GbRAM, SSD's, GTX1080