After landing no steering exit runway a.s.o

jopoloco · Post by **jopoloco** » Tue Nov 28, 2017 3:58 pm

Hello Prepar people.

I have a persistent problem. When I have landed, then it happens many times that I can't steer to exit the runway. The trust stay still on a value about 20%. The throttle lever is set on idle. So the plane can only be stopped with the "P"button.
There's nothing what I can do other then shut down. And that is not nice.
So, anybody present who recognizes this problem or to have a solution? It happens after 5 to 7 landings.

Jopoloco.

Martyson · Post by **Martyson** » Tue Nov 28, 2017 4:07 pm

Which aircraft?

jopoloco · Post by **jopoloco** » Tue Nov 28, 2017 9:40 pm

Hello Martyson, or Vaughan Martell?

Thanks for your reaction.

I fly with Beechcraft KingAir 350.

Also I can tell you that I have rudderpedals from Saitek and a yoke from YOKO. (A very good thing). Also the yoke cannot steer.
In the past I had this problem sometimes with Nice. This with another Saitek RudderPedals. All with the same PC.

Best regards.

Joop.

Martyson · Post by **Martyson** » Tue Nov 28, 2017 9:43 pm

Which P3D version?

jopoloco · Post by **jopoloco** » Wed Nov 29, 2017 12:42 am

P3D V4 and this week to V4.1 with only Client.

But this happens too in V2 and V3.

jopoloco · Post by **jopoloco** » Wed Nov 29, 2017 12:45 am

Correction. This happened in V2 and V3 too.

Martyson · Post by **Martyson** » Wed Nov 29, 2017 12:49 am

"I fly with Beechcraft KingAir 350. "

Is this the default P3D aircraft?

jopoloco · Post by **jopoloco** » Wed Nov 29, 2017 8:58 pm

Yes, it is.

Martyson · Post by **Martyson** » Wed Nov 29, 2017 9:05 pm

When you are on final approach are you hand flying or do you have the Autopilot ON?

jopoloco · Post by **jopoloco** » Wed Nov 29, 2017 9:15 pm

Handflying.

Martyson · Post by **Martyson** » Wed Nov 29, 2017 9:18 pm

Before you take off.
Can you taxi down the runway to the next exit and steer off the runway and taxi to the gate?

jopoloco · Post by **jopoloco** » Thu Nov 30, 2017 3:22 pm

Martyson,

I did what you said and I can say: no problems. I did it with the fields where previous the problems occur.
What I will now do is, that I make notifications what's happen in the landing. Before touchdown. But normaly when it occurs I'm on the ground, give some trust to continue mostly 20%, and then with turning to the exit...... no reaction. Only forward with the trust that is mentioned. But all the hardware is staying frozen.

What I shall do: I shall be attent what happens and then, after some time, I give you my experiences. And the fields where it happens.
May be you can understand then what's wrong or what I do wrong.

For this time, my thanks for your help.

Till later.

Joop.

jopoloco · Post by **jopoloco** » Fri Dec 01, 2017 10:18 pm

Hi Martyson,

In the meantime after 5 landings 3 times not steering. Trust is locked round 20%. So the plane will drive.
I see that the nosewheel is not moving when I steer with the rudderpedals or the yoke. Rudder, ailerons and elevaters move normal.

It's a mysterious problem.

Regards

Joop.

jopoloco · Post by **jopoloco** » Fri Dec 29, 2017 10:30 am

And it's still going on. And that's not funny.

Joop.

After landing no steering exit runway a.s.o

After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o

Re: After landing no steering exit runway a.s.o