MyTraffic 6a For Prepar3D v3 & v4
Re: MyTraffic 6a For Prepar3D v3 & v4
That did it. I took out the space in the xml file and it works. I have a gal sitting next to me named Elaine. Maybe she brought me some good luck today.
Thanks for all your assistance Elaine.
I also am a beta tester for REX and I know what it's like trying to solve problems inside a forum.
Bob G.
Thanks for all your assistance Elaine.
I also am a beta tester for REX and I know what it's like trying to solve problems inside a forum.
Bob G.
i7-7700k 4.5 Ghz. 32 G RAM. Nvidia RTX 3060. Samsung 32" monitor. Two Samsung 1TB SSD.
Re: MyTraffic 6a For Prepar3D v3 & v4
Very good, glad your up and running now
Elaine Dixon
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Re: MyTraffic 6a For Prepar3D v3 & v4
I have followed the instructions to install MT6 in P3D v4, but -hen I start the sim I do NOT get the screen where I should enable MT6. If I start P3D v4 and go to "Options" there is no button for "Add-Ons. What am I doing wrong? I have changed my MT6 path to the disk where it is installed (my E-disk).
Jack J Jackson
Jack J Jackson
Re: MyTraffic 6a For Prepar3D v3 & v4
Did you use the XML method?
i7-7700k 4.5 Ghz. 32 G RAM. Nvidia RTX 3060. Samsung 32" monitor. Two Samsung 1TB SSD.
Re: MyTraffic 6a For Prepar3D v3 & v4
Yes I did use the xml-method.
Jack
Jack
Re: MyTraffic 6a For Prepar3D v3 & v4
You have to follow Elaine's instructions to the t and then make sure you have the correct drive etc. where MT6 is installed and also check to make sure there are no spaces if there aren't any in the folder where MT6 is located.
i7-7700k 4.5 Ghz. 32 G RAM. Nvidia RTX 3060. Samsung 32" monitor. Two Samsung 1TB SSD.
-
- Posts: 2
- Joined: Mon Dec 07, 2015 8:41 pm
Re: MyTraffic 6a For Prepar3D v3 & v4
I notice that the instructions for using the scenery.cfg method specify that you have to disable trafficAircraft.bgl for P3D's own AI traffic. The instructions for the .xml method don't mention this step. Is it still necessary, or does the .xml method make it irrelevant?
Also, what traffic density setting are people using? I've got it at 50%, which seems to take a noticeable FPS hit.
Also, what traffic density setting are people using? I've got it at 50%, which seems to take a noticeable FPS hit.
Re: MyTraffic 6a For Prepar3D v3 & v4
Hello the nightfly
For best results you can turn off Default Prepar3D Aircraft Traffic, The steps are Included in the Additional Information at the bottom of the add-on.xml method Post
I use between 10\15 % on the traffic sliders, Using 50 % will have a missive effect on your performance. I suggest you start low and move the sliders up slowly to find a suitable balance of performance and visuals for your system set up
For best results you can turn off Default Prepar3D Aircraft Traffic, The steps are Included in the Additional Information at the bottom of the add-on.xml method Post
I use between 10\15 % on the traffic sliders, Using 50 % will have a missive effect on your performance. I suggest you start low and move the sliders up slowly to find a suitable balance of performance and visuals for your system set up
Elaine Dixon
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Re: MyTraffic 6a For Prepar3D v3 & v4
I have followed the instruction to set up the add-on.xml file and not able to get the enable prompt for My Traffic when starting up Prepar3d v4.
https://www.dropbox.com/s/k25kbs86wf229 ... n.png?dl=0
https://www.dropbox.com/s/k25kbs86wf229 ... n.png?dl=0
Re: MyTraffic 6a For Prepar3D v3 & v4
Hello eldon3069
Everything looks good, So I can not see the Issue
Try this step.........
Navigate to the location's below and Delete the 2 blue files, Then launch Prepar3D and test to see If you a prompted the "Enable" box
Local Disk (C:) ► ProgramData ► Lockheed Martin ► Prepar3D v4 ► add-ons.cfg
Local Disk (C:) ► Users ► You ► AppData ► Roaming ► Lockheed Martin ► Prepar3D v4 ► add-ons.cfg
Note: Its possible you do not have this file yet in the Roaming path, Let me know how you get on
Everything looks good, So I can not see the Issue
Try this step.........
Navigate to the location's below and Delete the 2 blue files, Then launch Prepar3D and test to see If you a prompted the "Enable" box
Local Disk (C:) ► ProgramData ► Lockheed Martin ► Prepar3D v4 ► add-ons.cfg
Local Disk (C:) ► Users ► You ► AppData ► Roaming ► Lockheed Martin ► Prepar3D v4 ► add-ons.cfg
Note: Its possible you do not have this file yet in the Roaming path, Let me know how you get on
Elaine Dixon
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Prepar3D® Forum Global Moderator
Forum Rules.....General Debugging Steps.....Installing\Updating\Uninstalling.....How to Post a Screenshot.....Activation Issues
Re: MyTraffic 6a For Prepar3D v3 & v4
Hi - I've deleted the files as stated but only received prompts to enable add on scenery not MyTraffic.
Eldon
Eldon
Re: MyTraffic 6a For Prepar3D v3 & v4
Hello.
I have big problem . My Traffic6 will not work for me. I have follow all instructions but it not work for me.
When I launch Prepar3D, I can not see this message, "Click Yes, MyTraffic 6 is now active ."
I have a new computer with Windows 10 and Prepar 3d v.4 . My Traffic is installed on my hardrive D.
Kjelle
I have big problem . My Traffic6 will not work for me. I have follow all instructions but it not work for me.
When I launch Prepar3D, I can not see this message, "Click Yes, MyTraffic 6 is now active ."
I have a new computer with Windows 10 and Prepar 3d v.4 . My Traffic is installed on my hardrive D.
Kjelle
Re: MyTraffic 6a For Prepar3D v3 & v4
I try but the problem is not solved.
Re: MyTraffic 6a For Prepar3D v3 & v4
Hi,
I did also have some issues with this installation, but if you are really following the installation method, it will work
What I did find out is that it is normally a miss match between the add-on.xml and what really the installation path is to MyTraffic Professional.
Here is a copy of mine add-on.xml;
<?xml version="1.0" encoding="UTF-8"?>
-<SimBase.Document id="add-on" version="4,0" Type="AddOnXml">
<AddOn.Name>MyTraffic6</AddOn.Name>
<AddOn.Description>MyTraffic6.</AddOn.Description>
-<AddOn.Component>
<Category>SimObjects</Category>
<Path>I:\MyTraffic Professional\MyTraffic6\Aircraft</Path>
</AddOn.Component>
-<AddOn.Component>
<Category>Scenery</Category>
<Path>I:\MyTraffic Professional\MyTraffic6</Path>
<Name>MyTrafficScenery</Name>
<Layer>114</Layer>
</AddOn.Component>
</SimBase.Document>
What I did discover is that I had installed Mytraffic like this;
<Path>I:\MyTraffic Professional 6a\MyTraffic6\....
I did see the Mytraffic installed in the sim under "Add On", but I didn't have any traffic.
Right now I am a happy camper, and it works like a charm :)
Regards
ReidS
I did also have some issues with this installation, but if you are really following the installation method, it will work
What I did find out is that it is normally a miss match between the add-on.xml and what really the installation path is to MyTraffic Professional.
Here is a copy of mine add-on.xml;
<?xml version="1.0" encoding="UTF-8"?>
-<SimBase.Document id="add-on" version="4,0" Type="AddOnXml">
<AddOn.Name>MyTraffic6</AddOn.Name>
<AddOn.Description>MyTraffic6.</AddOn.Description>
-<AddOn.Component>
<Category>SimObjects</Category>
<Path>I:\MyTraffic Professional\MyTraffic6\Aircraft</Path>
</AddOn.Component>
-<AddOn.Component>
<Category>Scenery</Category>
<Path>I:\MyTraffic Professional\MyTraffic6</Path>
<Name>MyTrafficScenery</Name>
<Layer>114</Layer>
</AddOn.Component>
</SimBase.Document>
What I did discover is that I had installed Mytraffic like this;
<Path>I:\MyTraffic Professional 6a\MyTraffic6\....
I did see the Mytraffic installed in the sim under "Add On", but I didn't have any traffic.
Right now I am a happy camper, and it works like a charm :)
Regards
ReidS