Search found 15 matches
- Sat Jan 12, 2019 7:11 pm
- Forum: Prepar3D Client Application Questions
- Topic: Objects erratically disappear in 4.4
- Replies: 49
- Views: 90980
Re: Objects erratically disappear in 4.4
i7-4790K@4,4GHz it is a little bit hight speed ins't it ??? No, that's the normal turbo tact from the factory. He is not overclocked. It has normal 4.0 GHz, but goes in turbo mode up to 4.4 GHz. He has been doing his job for over 4 years without problems, the temperature in the P3D is on average ma...
- Tue Jan 08, 2019 10:29 am
- Forum: Prepar3D Client Application Questions
- Topic: 3rd Party airport buildings turning black
- Replies: 29
- Views: 49352
Re: 3rd Party airport buildings turning black
It has nothing to do with it. I have the setting MAX_TEXTURE_REQUEST_DISTANCE = 320000.000000 in my P3D.cfg. Nevertheless, the building textures turn black from a certain height. Even without the increase in the distance that shouldn't happen, at least the textures should be back after a certain tim...
- Tue Jan 08, 2019 12:21 am
- Forum: Prepar3D Client Application Questions
- Topic: 3rd Party airport buildings turning black
- Replies: 29
- Views: 49352
Re: 3rd Party airport buildings turning black
I can fully support uhntissbaby111. For me, this phenomenon also occurs.
P3Dv4.4
My system: i7 4790K, 16GB RAM, GTX1080Ti, installation only on SSDs, Win10 64
P3Dv4.4
My system: i7 4790K, 16GB RAM, GTX1080Ti, installation only on SSDs, Win10 64
- Sat Jan 05, 2019 11:31 pm
- Forum: Prepar3D Client Application Questions
- Topic: Black Texture Issue need help with max_texture_request_distance
- Replies: 2
- Views: 6778
Re: Black Texture Issue need help with max_texture_request_distance
Rob mentioned 320000 in his video. I mean, you forgot a zero.
MAX_TEXTURE_REQUEST_DISTANCE=320000.000000
MAX_TEXTURE_REQUEST_DISTANCE=320000.000000
- Thu Dec 27, 2018 10:24 pm
- Forum: Prepar3D Client Application Questions
- Topic: Objects erratically disappear in 4.4
- Replies: 49
- Views: 90980
Re: Objects erratically disappear in 4.4
Error on my system I exclude. There is nothing overclocked, there are no high temperatures. The system was bought. A year ago, the GTX970 was replaced with a GTX1080Ti. Since everything else works perfectly for me, it has to be a software problem in this case. Since the problem exists since the upda...
- Thu Dec 27, 2018 6:10 pm
- Forum: Prepar3D Client Application Questions
- Topic: Objects erratically disappear in 4.4
- Replies: 49
- Views: 90980
Re: Objects erratically disappear in 4.4
My system: i7-4790K@4,4GHz, 16GB RAM, Nvidia GTX1080Ti, 1x 120GB SSD (Win10 64), 3x 500GB SSD
Upgrade from v4.3 to 4.4 Client and Content.
A complete reinstallation is currently out of the question for me. Apart from NZMF, everything works fine.
Upgrade from v4.3 to 4.4 Client and Content.
A complete reinstallation is currently out of the question for me. Apart from NZMF, everything works fine.
- Thu Dec 27, 2018 4:06 pm
- Forum: Prepar3D Client Application Questions
- Topic: Objects erratically disappear in 4.4
- Replies: 49
- Views: 90980
Re: Objects erratically disappear in 4.4
ORBX can't reproduce the error.
I once tested this without the ORBX NZMF scenery, but with ORBX NZSI. And I have to admit that it doesn't happen there. Now I don't know what else to do.
I once tested this without the ORBX NZMF scenery, but with ORBX NZSI. And I have to admit that it doesn't happen there. Now I don't know what else to do.
- Thu Dec 27, 2018 2:56 pm
- Forum: Prepar3D Client Application Questions
- Topic: Objects erratically disappear in 4.4
- Replies: 49
- Views: 90980
Re: Objects erratically disappear in 4.4
I'm the one Rob mentioned above. In some scenries, objects simply disappear, e.g. in ORBX Milford Sound. Here is a link to the video: https://youtu.be/NLm7gZFxaNc In Rob's Godzone Scenery, buildings disappear as well as Rob described above. My settings in the Scenery Complexity is very dense. It hap...
- Thu Oct 19, 2017 4:36 pm
- Forum: Prepar3D Client Application Questions
- Topic: [RESOLVED] P3Dv4.1, it jerks and wags
- Replies: 1
- Views: 4935
Re: P3Dv4.1, it jerks and wags
Problem solved. It had to do with the VSync. In my case, I had limited the frames to 33.6 in the Nvidia Inspector. Limitation to approximately 30 works already well. Likewise, there is no limit to the FPS.
Thanks.
Thanks.
- Thu Oct 19, 2017 3:02 pm
- Forum: Prepar3D Client Application Questions
- Topic: [RESOLVED] P3Dv4.1, it jerks and wags
- Replies: 1
- Views: 4935
[RESOLVED] P3Dv4.1, it jerks and wags
Hello, I have a problem with my fresh installed P3Dv4.1. There are no add-ons installed, only the P3D. During a flight the ground textures jiggle and jerky under the plane. It does not matter which settings I use. The ground always jerks. I have set a short video here to show the problem. Can anyone...
- Sun Sep 24, 2017 12:11 pm
- Forum: Prepar3D Client Application Questions
- Topic: Win 10 KB4038788 Update crashes my P3D v3
- Replies: 385
- Views: 845883
Re: KB4038788 crashes my P3D v3
I felt the same way. The P3Dv3 functioned with me last no longer. I have now completely uninstalled the P3D and set up Windows10 again. It was the hard method, but it spares my nerves. However, I am now missing my beloved flight simulator. But I don't want to reinstall it and all the add-ons again a...
- Fri Sep 15, 2017 5:47 pm
- Forum: Prepar3D Client Application Questions
- Topic: Win 10 KB4038788 Update crashes my P3D v3
- Replies: 385
- Views: 845883
Re: KB4038788 crashes my P3D v3
After my last crash I found this in the Windows event viewer: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80...
- Thu Sep 14, 2017 1:21 pm
- Forum: Prepar3D Client Application Questions
- Topic: Win 10 KB4038788 Update crashes my P3D v3
- Replies: 385
- Views: 845883
Re: KB4038788 crashes my P3D v3
I also ask for it. I can not use my P3Dv3.4.18.19475 at the moment.
- Wed Sep 13, 2017 6:00 pm
- Forum: Prepar3D Client Application Questions
- Topic: Win 10 KB4038788 Update crashes my P3D v3
- Replies: 385
- Views: 845883
Re: KB4038788 crashes my P3D
I don't have the P3Dv4 yet.
A clean installation without add-ons, I can not check. In any case, this happened today after the Windows update. After uninstalling the Windows update, the P3Dv3 will work again.
A clean installation without add-ons, I can not check. In any case, this happened today after the Windows update. After uninstalling the Windows update, the P3Dv3 will work again.
- Wed Sep 13, 2017 4:16 pm
- Forum: Prepar3D Client Application Questions
- Topic: Win 10 KB4038788 Update crashes my P3D v3
- Replies: 385
- Views: 845883
Re: KB4038788 crashes my P3D
Exactly the same by me.