Sunken runway (airport elevation)

Discussion related to terrain/scenery design.
Post Reply
brianv
Posts: 24
Joined: Fri Feb 14, 2014 10:17 am

Sunken runway (airport elevation)

Post by brianv »

I went a bit exploring outside of my normal flying areas and found that OYSH (Saadah) airport in Yemen and the runway are sunken within a hole. Is there an easy fix for such anormalities? I use P3Dv5HF2 and Mesh 5m and Orbx products including vector.
mendiola_loyola
Posts: 7
Joined: Tue Oct 26, 2010 6:49 pm
Location: Lima, Peru

Re: Sunken runway (airport elevation)

Post by mendiola_loyola »

You can change the elevation of the airport wih an scenery editor like ADE or using the SDK.
https://www.scruffyducksoftware.com/air ... ign-editor

Maybe the mesh terrain has the wrong elevations.

Regards
Alfredo Mendiola
Lima, Peru
brianv
Posts: 24
Joined: Fri Feb 14, 2014 10:17 am

Re: Sunken runway (airport elevation)

Post by brianv »

Many thanks Alfredo, I suspected that ADE would be needed. I never really tried it, but I will give it a go.
Post Reply