Search found 87 matches

by Ursli80
Mon Jul 15, 2019 5:39 pm
Forum: Prepar3D Professional Plus Client Application Questions
Topic: v4.5 Multichannel - Host higher fps then Clients
Replies: 3
Views: 5885

Re: v4.5 Multichannel - Host higher fps then Clients

Hi, I do not have a solution to that, but I have a few questions, because I'm dealing with them. Unfortunately I can not speak English and the translator is not always helpful. 1. Do I have to have identical PC's for this mode? 2. Do I have to install the P3D and all addons on all PC`s where to use ...
by Ursli80
Tue Jul 31, 2018 9:41 am
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Re: Graphic Card Power

Sorry if I again sound rude, but come on: you say, your CPU is running fairly high regarding P3D while your GPU is only up to 40-50% load. What could be the most obvious reason for that? You are constantly running into a bottleneck by the CPU. Obviously, somehow your load on your CPU is so high, th...
by Ursli80
Tue Jul 31, 2018 5:49 am
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Re: Graphic Card Power

Hello Urs, please do not try to compare P3D and XPlane. They are two different things, very different and each has it's advantages. The number one reason for performance problems in P3D is configuration settings are not optimized for your system. The GPU will rarely show a high utilization rate bec...
by Ursli80
Mon Jul 30, 2018 2:51 pm
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Re: Graphic Card Power

Hello, Urs, You mentioned: "I have medium attitudes I think. But in LSZH of Aerosoft I hardly have more than 10 FPS . XPlane 11 am with listener settings almost at 30 FPS." Just to verify. Is your main problem low FPS with P3D? Yes exactly. And that stops the simulator of course. I do not understan...
by Ursli80
Mon Jul 30, 2018 2:09 pm
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Re: Graphic Card Power

You are using two PC's, correct? Did you test both PC's ? How did you do your test? Which test parameter(s) were you looking at? What were you expecting the results should be? I only have one PC with an Nvidia GT960 4GM card. Maybe I could test same parameter(s) on my setup. Hello Vaughan, Thanks f...
by Ursli80
Mon Jul 30, 2018 1:42 pm
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Re: Graphic Card Power

Hello, is nobody from LM ready to answer this topic? Best regards Urs Why should anyone of LM answer here? You make a clear cut statement with a hidden question no one can answer correctly. LM DID shift a hell lot from the CPU to the GPU. If you do not observe this, most probably your settings are ...
by Ursli80
Tue Jul 24, 2018 4:06 pm
Forum: Other Support Questions
Topic: Graphic Card Power
Replies: 11
Views: 4517

Graphic Card Power

Hello Dear LM Team, i have done some tests. Although P3D runs much better with the 64bit I noticed that still almost nothing of the performance of the graphics card is claimed. I have a GTX 1080 TI FE in use. But it is never busy. Why was not it worked on the V4 version? Is it still planned? Or only...
by Ursli80
Mon Apr 16, 2018 7:59 am
Forum: Other Support Questions
Topic: XATC Error Message
Replies: 3
Views: 954

Re: XATC Error Message

Hello Vaugahn, I have no additional program installed. This must be something from the P3D? As I said, I have just put my computer up anew and the P3D too. Now I should reinstall the P3D again? But can not you be serious that you have to reinstall? Well then I have to get back to work. Best regards ...
by Ursli80
Sun Apr 15, 2018 11:38 am
Forum: Other Support Questions
Topic: XATC Error Message
Replies: 3
Views: 954

XATC Error Message

Hello P3D Team, Since yesterday I have the problem that I the P3D v4.2 at start the message XATC .... error message displays. And this must cause the problem that my P3D imm crashes in RWY near. Unfortunately, I can not make a photo of the error message because I had to operate my knee and it just i...
by Ursli80
Mon Mar 19, 2018 9:46 am
Forum: Other Support Questions
Topic: Even worse FPS with V4.2
Replies: 12
Views: 4184

Re: Even worse FPS with V4.2

Hi,

Can I assume that LM has no solution for the ViewGroups problems?

Best regards
Urs
by Ursli80
Wed Feb 28, 2018 5:03 pm
Forum: Other Support Questions
Topic: Even worse FPS with V4.2
Replies: 12
Views: 4184

Re: Even worse FPS with V4.2

Hello Brady,

yes all my 3 projectors are connected to the Asus GTX 1080 TI FE. There is no doubt about that. I can send a photo else?

Best regards
Urs
by Ursli80
Wed Feb 28, 2018 8:52 am
Forum: Other Support Questions
Topic: Even worse FPS with V4.2
Replies: 12
Views: 4184

Re: Even worse FPS with V4.2

Hello LM Team,

I have now tested Fly Elise with the P3D v4.2 with only 2 projectors and Viegroubs. And what should I do the FPS in standard flight without add-ons are 19.

Why do you mot the v4 so extreme multiview problems?

Can you still manage that?

Best regards
Urs
by Ursli80
Wed Feb 21, 2018 8:28 am
Forum: Other Support Questions
Topic: Even worse FPS with V4.2
Replies: 12
Views: 4184

Re: Even worse FPS with V4.2

Hello, Yesterday I set up my Multieview with the P3D v4 Viewgroups with Fly Elise. And well, what should I say. I have close to 16 FPS with the standard P3D flight. Nothing else is installed. And many options like shadows and reflections are turned off. Not even ASP4 I have turned on. Why does the P...
by Ursli80
Sun Feb 18, 2018 8:34 am
Forum: Other Support Questions
Topic: missing depiction from Speed in clouds
Replies: 4
Views: 1745

Re: missing depiction from Speed in clouds

Hello, I also do not think that it is a weather tool problem. The weather tool was certainly also active in the picture on the left. But this is already noticeable in my HC with the Curved Screen. But never had the thought that this was wrong. But now that it is mentioned, it is true that this can n...
by Ursli80
Sat Feb 17, 2018 12:35 pm
Forum: Other Support Questions
Topic: Even worse FPS with V4.2
Replies: 12
Views: 4184

Re: Even worse FPS with V4.2

Hello, Unfortunately, switching off the recording function has brought nothing. The FPS stay at 30 with a big window and the already mentioned resolution. In div. Forums is reported that some people like me even more FPS problem than with the V4.1 to what can this be? I have not yet set my Multiwiev...

Go to advanced search