P3Dv5 HF2 crash after catapulting

Other problems or issues not covered by other troubleshooting topics.
mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

P3Dv5 HF2 crash after catapulting

Postby mpni » Sat Aug 22, 2020 4:20 pm

Hi
If the detection of crashed is activaded, P3Dv5 crash the aircraft at the end of the deck after catapulting.
If the detection of crashed is not activated, the aircraft take quickly speed (about 260kt) at the end of the catapult, as a collision with the ground.
So, catapulting is not fully available.
Regards
Michel
Last edited by mpni on Sat Aug 22, 2020 4:26 pm, edited 1 time in total.

mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

Re: P3Dv5 crash after catapulting

Postby mpni » Sat Aug 22, 2020 4:23 pm

That is with all aircrafts and all carriers, on P3Dv5 HF2.

JorgenSA
Posts: 2695
Joined: Sun Mar 11, 2018 7:17 am
Location: 5 NM NE of EDXF

Re: P3Dv5 HF2 crash after catapulting

Postby JorgenSA » Sat Aug 22, 2020 4:27 pm

Michel,

Catapulting - from where?

Jorgen
System: i7-7700K @ 4.66 GHz, ASUS Z170-A motherboard, 16 GB 3200 MHz DDR4 RAM, nVidia GTX 960 w/ 4 GB DDR5 VRAM, Windows 10 Home.

All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.

mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

Re: P3Dv5 HF2 crash after catapulting

Postby mpni » Sat Aug 22, 2020 7:24 pm

Hi Jorgen
Front left catapult (but I think with all catapult)
Regards

User avatar
Martyson
Posts: 9988
Joined: Sun Mar 25, 2012 11:08 am

Re: P3Dv5 HF2 crash after catapulting

Postby Martyson » Sat Aug 22, 2020 8:10 pm

Michel,

Are you launching from the P3D default carrier with the default F35C?
Best Regards,
Vaughan Martell (KDTW)

mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

Re: P3Dv5 HF2 crash after catapulting

Postby mpni » Sun Aug 23, 2020 6:39 am

Hi Martyson
When the detection is activated, I confirm the crash on the four catapults on the default carrier with the default F35C.
This is the same with all aircrafts and all carriers.
When the detection is not activated, speed make important acceleration as whe can see during a ground or obstacle collision.
Michel

User avatar
Martyson
Posts: 9988
Joined: Sun Mar 25, 2012 11:08 am

Re: P3Dv5 HF2 crash after catapulting

Postby Martyson » Sun Aug 23, 2020 8:41 am

Michel ,

Do you have a couple screenshots showing MFP / HUD speed near end of CAT and just after clearing the CAT?

What is the F35C gross weight at CAT launch?

My test launch:

Image

Image
Best Regards,
Vaughan Martell (KDTW)

mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

Re: P3Dv5 HF2 crash after catapulting

Postby mpni » Sun Aug 23, 2020 9:26 am

F35C has a hight speed.
This test in the video is with and Etendard by RFN on the Charles de Gaulle by RFN
The speed of the Etendard is below the speed of the F35C.
So we can see the acceleration.
This test is with crash detection unselected.
If you can't read mkv, please say me what you need.

http://royalefrenchnavy.restauravia.fr/ ... _P3Dv5.mkv

Edit 1 : on P3Dv4.5HF2, all is correct.

Edit 2 : same test with the Etendend on a default P3Dv5HF2 carrier with catapulting using Shift + Space bar :
http://royalefrenchnavy.restauravia.fr/ ... _P3Dv5.mkv

Edit 3 :
Another test using F35C at 41000 pounds. We can see the speed passing 219kt to 253 kt
http://royalefrenchnavy.restauravia.fr/ ... Dv5HF2.mkv

mpni
Posts: 106
Joined: Thu Aug 09, 2018 10:37 am

Re: P3Dv5 HF2 crash after catapulting

Postby mpni » Sun Aug 23, 2020 2:08 pm

When the "detect crashes and damage" is selected, all catapulting make a crash when the aircraft lives the deck.
This seems to be the reason why the speed increases rapidly.

http://royalefrenchnavy.restauravia.fr/ ... Dv5HF2.mkv


Return to “Other Support Questions”

Who is online

Users browsing this forum: Google [Bot] and 33 guests