.net framework error

Other problems or issues not covered by other troubleshooting topics.
skynet
Posts: 38
Joined: Fri Oct 24, 2014 8:44 am

Re: .net framework error

Postby skynet » Fri Mar 27, 2020 8:20 pm



That is your problem (ntdll.dll).

Why did you have to re-install p3d?
Have you had this error in the past weeks?
I was change HHD to SSD m2
problems starts after update win 10
Have you had this error (ntdll.dll) in the past weeks?

I noticed here you had Windows problems and upgraded your PC hardware?.
Do you have a home built PC or a store name brand PC?

viewtopic.php?f=6314&t=136568&p=211028#p211028

YES all hardware have latest software

RTX2080
Intel and all onboard things….
Sound card are on board
SSD m2
others card and hardware dotn have it

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: .net framework error

Postby Martyson » Fri Mar 27, 2020 8:22 pm



I was change HHD to SSD m2
problems starts after update win 10
Have you had this error (ntdll.dll) in the past weeks?

I noticed here you had Windows problems and upgraded your PC hardware?.
Do you have a home built PC or a store name brand PC?

viewtopic.php?f=6314&t=136568&p=211028#p211028

YES all hardware have latest software

RTX2080
Intel and all onboard things….
Sound card are on board
SSD m2
others card and hardware dotn have it
Is your PC a home built PC or a store name brand purchased PC?
Best Regards,
Vaughan Martell (KDTW)

skynet
Posts: 38
Joined: Fri Oct 24, 2014 8:44 am

Re: .net framework error

Postby skynet » Fri Mar 27, 2020 8:23 pm

You need to get everything about the .NET Framework, not just v. 4.0, and install all of it.

When you have finished installing all that, reboot.

Now run Windows Update, and when you run that, make sure that under "Advanced options" the toggle switch named "Receive updates for other Microsoft products" is turned ON.

Continue running Windows Update until no more updates are found.

Jorgen
its done …and same

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: .net framework error

Postby Martyson » Fri Mar 27, 2020 8:25 pm

You need to get everything about the .NET Framework, not just v. 4.0, and install all of it.

When you have finished installing all that, reboot.

Now run Windows Update, and when you run that, make sure that under "Advanced options" the toggle switch named "Receive updates for other Microsoft products" is turned ON.

Continue running Windows Update until no more updates are found.

Jorgen
its done …and same
Ok, that is good you followed Jorgen's instructions.

Is your PC a home built (you built it) PC or a store name brand purchased PC?
Best Regards,
Vaughan Martell (KDTW)

skynet
Posts: 38
Joined: Fri Oct 24, 2014 8:44 am

Re: .net framework error

Postby skynet » Fri Mar 27, 2020 8:31 pm

You need to get everything about the .NET Framework, not just v. 4.0, and install all of it.

When you have finished installing all that, reboot.

Now run Windows Update, and when you run that, make sure that under "Advanced options" the toggle switch named "Receive updates for other Microsoft products" is turned ON.

Continue running Windows Update until no more updates are found.

Jorgen
its done …and same
Ok, that is good you followed Jorgen's instructions.

Is your PC a home built (you built it) PC or a store name brand purchased PC?
Its Home base.....but only change m2 SSD thanks so much

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: .net framework error

Postby Martyson » Fri Mar 27, 2020 8:40 pm



its done …and same
Ok, that is good you followed Jorgen's instructions.

Is your PC a home built (you built it) PC or a store name brand purchased PC?
Its Home base.....but only change m2 SSD thanks so much
Ok, home built PC (may not be on warranty).

If Windows is now fully updated and there are no errors when you reboot the PC and Windows works properly.

If the only time you get an error is when starting P3D.

Then it may be time to Uninstall/Reinstall P3D?

If you agree the steps to download a new copy of P3D and install it are in these instructions:
Uninstalling/Deactivating Prepar3D
viewtopic.php?f=6322&t=125187

Downloading and Installing Prepar3D
viewtopic.php?f=6322&t=120676

If P3D had worked after initially installed the General Debugging Steps may provide a solution:
viewtopic.php?f=6312&t=123246
Best Regards,
Vaughan Martell (KDTW)

skynet
Posts: 38
Joined: Fri Oct 24, 2014 8:44 am

Re: .net framework error

Postby skynet » Fri Mar 27, 2020 9:03 pm



Ok, that is good you followed Jorgen's instructions.

Is your PC a home built (you built it) PC or a store name brand purchased PC?
Its Home base.....but only change m2 SSD thanks so much
Ok, home built PC (may not be on warranty).

If Windows is now fully updated and there are no errors when you reboot the PC and Windows works properly.

If the only time you get an error is when starting P3D.

Then it may be time to Uninstall/Reinstall P3D?

If you agree the steps to download a new copy of P3D and install it are in these instructions:
Uninstalling/Deactivating Prepar3D
viewtopic.php?f=6322&t=125187

Downloading and Installing Prepar3D
viewtopic.php?f=6322&t=120676

If P3D had worked after initially installed the General Debugging Steps may provide a solution:
viewtopic.php?f=6312&t=123246
OK now start long night. Thanks a lot …..I send you info about finish

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: .net framework error

Postby Martyson » Fri Mar 27, 2020 9:09 pm

"OK now start long night. Thanks a lot …..I send you info about finish"

Virus checker OFF:
If you have a good internet speed the Download, Uninstall and Reinstall should be less than 1.5 Hr.

After re-install leave P3D in a default state (no Add-ons) for initial testing.

Good luck.
Best Regards,
Vaughan Martell (KDTW)


Return to “Other Support Questions”

Who is online

Users browsing this forum: No registered users and 26 guests