Joystick function

Other problems or issues not covered by other troubleshooting topics.
EvaTherese
Posts: 30
Joined: Mon Mar 16, 2020 6:56 pm

Re: Joystick function

Postby EvaTherese » Wed Mar 25, 2020 7:34 pm

I went to the hanger, did some repairs and total overhauling - and now the hat switch works fine!

thanks for help along the way :)
E.

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: Joystick function

Postby Martyson » Wed Mar 25, 2020 7:36 pm

I went to the hanger, did some repairs and total overhauling - and now the hat switch works fine!

thanks for help along the way :)
E.
Would you share you fix information?
It would help all pilots in the forum.
Best Regards,
Vaughan Martell (KDTW)

EvaTherese
Posts: 30
Joined: Mon Mar 16, 2020 6:56 pm

Re: Joystick function

Postby EvaTherese » Wed Mar 25, 2020 8:48 pm

I would, if I knew what I geniusly did...
I did several things and don't know exactly what did it :

1 - In the hanger I changed the battery a couple of times, changed some parts now and then, activated the overhauling procedure...
Mostly this and that randomly playing around.

2 - ran a rapair of the installation of Cessna program

3 - installed updates packages from aerosoft

perhaps it was 2 and 3 that did it...

I am not happy with the graphic though, the skies comes in squares and the trees looks funny...

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: Joystick function

Postby Martyson » Wed Mar 25, 2020 9:23 pm

I would, if I knew what I geniusly did...
I did several things and don't know exactly what did it :

1 - In the hanger I changed the battery a couple of times, changed some parts now and then, activated the overhauling procedure...
Mostly this and that randomly playing around.

2 - ran a rapair of the installation of Cessna program

3 - installed updates packages from aerosoft

perhaps it was 2 and 3 that did it...

I am not happy with the graphic though, the skies comes in squares and the trees looks funny...
Eva,

Thanks for the follow up.

For your graphics problem it would be best to start a new forum topic.

Glad to hear your original problem in this post is now resolved.
Best Regards,
Vaughan Martell (KDTW)

EvaTherese
Posts: 30
Joined: Mon Mar 16, 2020 6:56 pm

Re: Joystick function

Postby EvaTherese » Thu Mar 26, 2020 7:41 pm

Hi,

just to let you know: today when I started the p3d again, the hat switch was not working properly as before. I then did as you suggested: set F22 as default, restarted the program, and it worked fine. I then changed veichle to C182, and there it worked as well....

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: Joystick function

Postby Martyson » Thu Mar 26, 2020 7:53 pm

Hi,

just to let you know: today when I started the p3d again, the hat switch was not working properly as before. I then did as you suggested: set F22 as default, restarted the program, and it worked fine. I then changed veichle to C182, and there it worked as well....
Eva,

The F22 at KVPS should remain the P3D default flight.

Have you asked A2A support about this?

Note: Once you make the F22 at KVPS your default flight.
The next time you start P3D when the aircraft / airport selection screen appears you can select any aircraft and airport.
The default parameters (default flight) are already loaded in the background .... you do not have to actually load the default flight.


Glad to hear your problem is resolved - twice.
Best Regards,
Vaughan Martell (KDTW)

hofbar58
Posts: 1
Joined: Mon Apr 13, 2020 12:27 pm

Re: crasch

Postby hofbar58 » Mon Apr 13, 2020 1:00 pm

Plaese help,
Have been using prepar3D academic since December 18 2019, until now no problems whats so ever, but since Yesterday 12/4 the sim craasches whem I move the controles or the levers of the Quadrant ( Both Saitek ) I hope that I'm on the right spot here, if not would you please direct to where I should be.
Computer is reasonable new +/- 6 monts,
Processor Intel i5-96KF
cpu 3.70GHz
RAM 16 GB
64 Bits.
Thank you

JaJo

Martyson
Posts: 8319
Joined: Sun Mar 25, 2012 11:08 am

Re: Joystick function

Postby Martyson » Mon Apr 13, 2020 2:12 pm

This topic is about a Joystick Hat switch problem.

Do you want to start a new topic about your P3D Crash?
Best Regards,
Vaughan Martell (KDTW)


Return to “Other Support Questions”

Who is online

Users browsing this forum: No registered users and 32 guests