PMDG, QW787 and GSX outside texture not appear

For all topics that don't fit into another category. Note that we cannot promise that any of these posts will be responded to by our development team.
pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

PMDG, QW787 and GSX outside texture not appear

Postby pile » Wed Jul 03, 2019 5:24 pm

I traveled from January to May and I could not install version 4.4, I was at version 4.3. When I came back, I installed version 4.5. All works well except for the latest versions of PMDG, QW787 v1.1.3 and GSX v2, their outside texture not appear. However vehicles like FSLab a320, tfdi 717 among others do not have this problem.

I destroyed the Shaders, reinstalled v 4.5 according to Poppet's recommendations (Option 1 and 2) but the problem is still there.
https://www.avsim.com/forums/topic/523907-uninstallingreinstalling-prepar3d-v4/

Some would have an idea where this problem comes from?

It is possible to attach images to show the problem?

Thanks in advance for your help before I have to reinstall p3d from scratch (Option 3)

Regards

Pierre

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Wed Jul 03, 2019 7:50 pm

I traveled from January to May and I could not install version 4.4, I was at version 4.3. When I came back, I installed version 4.5. All works well except for the latest versions of PMDG, QW787 v1.1.3 and GSX v2, their outside texture not appear. However vehicles like FSLab a320, tfdi 717 among others do not have this problem.

I destroyed the Shaders, reinstalled v 4.5 according to Poppet's recommendations (Option 1 and 2) but the problem is still there.
https://www.avsim.com/forums/topic/5239 ... epar3d-v4/

Some would have an idea where this problem comes from?

It is possible to attach images to show the problem?

Thanks in advance for your help before I have to reinstall p3d from scratch (Option 3)

Regards

Pierre
Post screenshots:
http://www.prepar3d.com/forum/viewtopic ... 5&t=126059
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Wed Jul 03, 2019 8:23 pm

Thanks and here the screenshots :)

PMDG 747 in previewer and on the runway
Image
Image

QW787 1.1.3. No problem with 1.1.2a
Image

GSX 2 See the characters without their vehicule
Image
Image

Seems that my sim not support their adaptation for PBR. Maybe...

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Wed Jul 03, 2019 8:35 pm

PMDG, for example.
Have you installed their PBR update?
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Thu Jul 04, 2019 12:58 am

PMDG, for example.
Have you installed their PBR update?
Yes I installed their last version and probably they include PBR.

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Thu Jul 04, 2019 1:02 am

PMDG, for example.
Have you installed their PBR update?
Yes I installed their last version and probably they include PBR.
Have you contacted PMDG support?
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Thu Jul 04, 2019 1:13 am


Have you contacted PMDG support?
Yes I did but as Qw787 and FsDreamteam and they said that its because is not concern only their addon its not an issue for them, its a problem of my sim. Probably its true and its why I created this post here.

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Thu Jul 04, 2019 1:28 am


Have you contacted PMDG support?
Yes I did but as Qw787 and FsDreamteam and they said that its because is not concern only their addon its not an issue for them, its a problem of my sim. Probably its true and its why I created this post here.
Maybe try the P3D debugging steps here:
http://www.prepar3d.com/forum/viewtopic ... 2&t=123246


This is what I see with P3Dv4.5 HF1 and PMDG747CF:

Image

Image
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Thu Jul 04, 2019 1:29 pm


Maybe try the P3D debugging steps here:
http://www.prepar3d.com/forum/viewtopic ... 2&t=123246
Thank you very much Vaughan I will try it and let you know :)

Lucr
Posts: 2
Joined: Fri Jul 05, 2019 10:26 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Lucr » Fri Jul 05, 2019 2:02 pm

Hi

I have the same problem. With the latest update from GSX level 2 with PBR I only see the driver of the push back truck and the suitcases are hoovering above the ground as they arive at the plane. Also I cant see the default F 16 cause of PBR. Is this A settings problem? GPU NVIDIA GEFORCE 1080.
Hope someone can help me.

Lucr
Holland

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Fri Jul 05, 2019 2:07 pm

Hi

I have the same problem. With the latest update from GSX level 2 with PBR I only see the driver of the push back truck and the suitcases are hoovering above the ground as they arive at the plane. Also I cant see the default F 16 cause of PBR. Is this A settings problem? GPU NVIDIA GEFORCE 1080.
Hope someone can help me.

Lucr
Holland
What happens if you disable GSX, exit P3D, reboot your PC and test the default F 16 again?

Have you contacted GSX Support?
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Fri Jul 05, 2019 2:41 pm

Hi

I have the same problem. With the latest update from GSX level 2 with PBR I only see the driver of the push back truck and the suitcases are hoovering above the ground as they arive at the plane. Also I cant see the default F 16 cause of PBR. Is this A settings problem? GPU NVIDIA GEFORCE 1080.
Hope someone can help me.

Lucr
Holland
What happens if you disable GSX, exit P3D, reboot your PC and test the default F 16 again?

Have you contacted GSX Support?
I contacted the GSX support and when they know that I have problem with my PMDG 747 and QW787 also they said that is not issue about GSX and they erase my post even if have another user with this problem...

I tried different setup in NVIDIA control panel as they said in the P3D debugging steps documentation and it not resolve the problem with my pmdg 747.

I think seriously to reinstall p3d 4.5 for scratch and also in another drive it have only 60gb left on 500gb. If after this the issue persists I will be sure that its my graphic card setup the problem.

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Fri Jul 05, 2019 3:02 pm

Hi

I have the same problem. With the latest update from GSX level 2 with PBR I only see the driver of the push back truck and the suitcases are hoovering above the ground as they arive at the plane. Also I cant see the default F 16 cause of PBR. Is this A settings problem? GPU NVIDIA GEFORCE 1080.
Hope someone can help me.

Lucr
Holland
What happens if you disable GSX, exit P3D, reboot your PC and test the default F 16 again?

Have you contacted GSX Support?
I contacted the GSX support and when they know that I have problem with my PMDG 747 and QW787 also they said that is not issue about GSX and they erase my post even if have another user with this problem...

I tried different setup in NVIDIA control panel as they said in the P3D debugging steps documentation and it not resolve the problem with my pmdg 747.

I think seriously to reinstall p3d 4.5 for scratch and also in another drive it have only 60gb left on 500gb. If after this the issue persists I will be sure that its my graphic card setup the problem.
What happens if you disable GSX, exit P3D, reboot your PC and test the PMDG747 again?
Best Regards,
Vaughan Martell (KDTW)

pile
Posts: 21
Joined: Sat May 27, 2017 6:00 pm

Re: PMDG, QW787 and GSX outside texture not appear

Postby pile » Fri Jul 05, 2019 3:07 pm



What happens if you disable GSX, exit P3D, reboot your PC and test the default F 16 again?

Have you contacted GSX Support?
I contacted the GSX support and when they know that I have problem with my PMDG 747 and QW787 also they said that is not issue about GSX and they erase my post even if have another user with this problem...

I tried different setup in NVIDIA control panel as they said in the P3D debugging steps documentation and it not resolve the problem with my pmdg 747.

I think seriously to reinstall p3d 4.5 for scratch and also in another drive it have only 60gb left on 500gb. If after this the issue persists I will be sure that its my graphic card setup the problem.
What happens if you disable GSX, exit P3D, reboot your PC and test the PMDG747 again?
I had this problem with PMDG747 and qw787 before I installed GSX 2.

Martyson
Posts: 8657
Joined: Sun Mar 25, 2012 11:08 am

Re: PMDG, QW787 and GSX outside texture not appear

Postby Martyson » Fri Jul 05, 2019 3:13 pm


Maybe try the P3D debugging steps here:
http://www.prepar3d.com/forum/viewtopic ... 2&t=123246
Thank you very much Vaughan I will try it and let you know :)
Have you gone through all the debugging steps yet?
Best Regards,
Vaughan Martell (KDTW)


Return to “Miscellaneous”

Who is online

Users browsing this forum: No registered users and 11 guests