Search found 210 matches

by Sabre57
Sat May 23, 2020 12:43 am
Forum: Miscellaneous
Topic: Strange shadow line on water KHQM-Orbx
Replies: 8
Views: 412

Re: Strange shadow line on water KHQM-Orbx

That looks like a terrain reflection. Assuming that you have them turned on try turning them off and see what occurs.
by Sabre57
Thu May 07, 2020 1:24 pm
Forum: Prepar3D Website and Download Questions
Topic: Forum very slow and often inaccessible
Replies: 27
Views: 4673

Re: Forum very slow and often inaccessible

Interesting. It took 5 hops and a tenth of a second just to get out of my state. And then 1 hop timed out and then an additional 5 hops to get here.
by Sabre57
Tue May 05, 2020 8:22 pm
Forum: Prepar3D Client Application Questions
Topic: NVIDIA GeForce GTX 1080 stopped working DXGI_ERROR_DEVICE_HUNG
Replies: 99
Views: 16292

Re: NVIDIA GeForce GTX 1080 stopped working DXGI_ERROR_DEVICE_HUNG

I'm beginning to wonder if there isn't a relationship between AA and something, what I don't know, causing this error. I'm wondering because I can run the sim on 4xmsaa or 2xssaa. When I change to either 8xmsaa or 4xssaa I immediately get device hung. Texture size doesn't matter as long as I have t...
by Sabre57
Tue May 05, 2020 12:41 am
Forum: Prepar3D Client Application Questions
Topic: NVIDIA GeForce GTX 1080 stopped working DXGI_ERROR_DEVICE_HUNG
Replies: 99
Views: 16292

Re: NVIDIA GeForce GTX 1080 stopped working DXGI_ERROR_DEVICE_HUNG

I'm beginning to wonder if there isn't a relationship between AA and something, what I don't know, causing this error. I'm wondering because I can run the sim on 4xmsaa or 2xssaa. When I change to either 8xmsaa or 4xssaa I immediately get device hung. Texture size doesn't matter as long as I have th...
by Sabre57
Wed Apr 29, 2020 7:03 pm
Forum: Other Support Questions
Topic: Fix for KTRI poles, red towers, and P3d billboards
Replies: 9
Views: 1377

Re: Fix for KTRI poles, red towers, and P3d billboards

I have these objects at my local field in P3D, KFNT, and believe they could be at any airport. At my field these are light poles for tarmac lighting. I've also seen many of these objects along expressways. I assume they are light poles as well and they seem way to large. As a temporary fix I've rena...
by Sabre57
Fri Apr 24, 2020 8:18 pm
Forum: Prepar3D Client Application Questions
Topic: V5 Slew mode sudden runaway
Replies: 3
Views: 485

Re: V5 Slew mode sudden runaway

Check your slew mode axis assignments. I had this happen when my throttle was mapped to one of them.
by Sabre57
Wed Apr 22, 2020 2:12 pm
Forum: Hardware Specific Questions
Topic: Honeycomb Yoke
Replies: 3
Views: 1521

Re: Honeycomb Yoke

For me, the Honeycomb yoke works in both 4.5 and 5.0.
by Sabre57
Sat Apr 18, 2020 1:37 pm
Forum: Prepar3D Client Application Questions
Topic: V5 'dedicated graphics memory has run out' 8GB VRAM
Replies: 19
Views: 5366

Re: V5 'dedicated graphics memory has run out' 8GB VRAM

FWIW. I was having a similar issue with a 4GB card. No surprise since 4GB is the minimum spec. I was wondering if I was going to have to get a new card. However, I was able to get it to run on my triple 5960x1080 setup, with some pretty good visuals, by reducing the Texture Resolution setting from 4...
by Sabre57
Sun Mar 22, 2020 2:29 pm
Forum: Prepar3D Client Application Questions
Topic: DXGI_ERROR_DEVICE_HUNG - 1080TI
Replies: 26
Views: 3800

Re: DXGI_ERROR_DEVICE_HUNG - 1080TI

I've had this issue when overclocking the GPU. However, since you installed the latest driver it should have removed any over clocking. So I have two guesses as to what may be happening: 1. When you updated the drivers did you completely remove the old driver before installing the new one? If not I ...
by Sabre57
Fri Feb 14, 2020 7:20 pm
Forum: Miscellaneous
Topic: Incomplete and outdated scenarios
Replies: 4
Views: 8585

Re: Incomplete and outdated scenarios

It doesn’t solve the big picture, but you could use airport design editor and “fix” whichever airport you like. Depending on how big the differences are and how many of them you wish to fix it can take a lot of effort. I started working on my home airport about a week ago, just to get rid of a runwa...
by Sabre57
Wed Jan 29, 2020 8:31 pm
Forum: Hardware Specific Questions
Topic: Saitek Yolk Trim Hat won’t change view anymore
Replies: 19
Views: 14789

Re: Saitek Yolk Trim Hat won’t change view anymore

Two other things I just thought about. Maybe either the controls file or the config file is corrupt and should be regenerated.
by Sabre57
Wed Jan 29, 2020 8:26 pm
Forum: Hardware Specific Questions
Topic: Saitek Yolk Trim Hat won’t change view anymore
Replies: 19
Views: 14789

Re: Saitek Yolk Trim Hat won’t change view anymore

The hat switch is not recognized as an axis by P3d. You configure it under keyboard/buttons section in controls. Do a search on the pan command and you should see how its setup. On another note, every once in a while my control scheme gets messed up and I need to correct a few key combinations. I a...
by Sabre57
Tue Jan 28, 2020 3:00 pm
Forum: Video Showcase
Topic: MSE Utah 4X in Aerosoft F-14 at Mach 1 (4K 60 FPS)
Replies: 2
Views: 15384

Re: MSE Utah 4X in Aerosoft F-14 at Mach 1 (4K 60 FPS)

Love it! But where’s your RIO? Why hasn’t Goose been replaced?
by Sabre57
Tue Jan 28, 2020 2:36 pm
Forum: Hardware Specific Questions
Topic: Saitek Yolk Trim Hat won’t change view anymore
Replies: 19
Views: 14789

Re: Saitek Yolk Trim Hat won’t change view anymore

The hat switch is not recognized as an axis by P3d. You configure it under keyboard/buttons section in controls. Do a search on the pan command and you should see how its setup. On another note, every once in a while my control scheme gets messed up and I need to correct a few key combinations. I at...
by Sabre57
Sun Dec 15, 2019 1:04 pm
Forum: Development Showcase
Topic: Chevrolet Suburban WIP
Replies: 19
Views: 23198

Re: Chevrolet Suburban WIP

I like it! Now I can drive to the airport and not just magically show up.

Go to advanced search